ER500 – Industrial dual-SIM 4G LTE cellular router with Wi-Fi and serial ports

Industrial dual-SIM 4G LTE cellular router with Wi-Fi and serial ports

Industrial Cellular Routers

  • 128MB DDR2
  • 32MB
  • MediaTek@ 580MHz
  • IP30 Metal
Manufacturer part number
ER500
Manufacturer
Elastel
Operating Temperature
-35 to 75°C (-31 to 167°F)
DRAM
128MB DDR2

The Elastel ER500 industrial cellular router provides 4G LTE connectivity with failover between two SIM cards, for data transmission and collection from serial devices.

Product overview

Overview. The Elastel ER500 is a dual-SIM industrial 4G LTE cellular router made by Elastel. It integrates five 10/100 Mbps Ethernet ports, Wi-Fi and RS232 and RS485 serial ports for industrial data collection.

Main characteristics. Automatic failover between two mini SIM cards (25 mm × 15 mm) for 4G LTE, 3G WCDMA and 2G GSM networks depending on region. Cellular module installed in one mPCIe slot. Wi-Fi IEEE 802.11b/g/n at 150 Mbps, AP and client modes. MediaTek CPU at 580 MHz, 128 MB DDR2 DRAM and 32 MB storage. ElastOS operating system based on OpenWRT, with SDK support for secondary development.

Interfaces and connectivity. Five 10/100 Mbps Ethernet ports configurable as LAN or WAN, with 1.5 KV network isolation transformer protection. One RS232 and one RS485 port on a 5-pin industrial terminal block, with 15 kV ESD protection. Serial-to-IP protocols Modbus RTU and Modbus TCP, MQTT, HTTP and OPC UA. Network protocols PPP, PPPoE, SNMP, TCP, UDP, DHCP, OSPF, BGP, DNS and DDNS. VPN tunnels PPTP, L2TP, GRE, IPSec (IKEv1/IKEv2) and OpenVPN.

Power and environment. DC power supply from 5 to 36 V with over-current protection and reverse connection protection. Power consumption of 250 to 310 mA at 12 V DC in working mode and 150 to 230 mA in standby. Operating temperature -35 to 75 °C, storage temperature -40 to 85 °C, ambient humidity 5 to 95 % non-condensing. IP30 metal housing, DIN-rail or panel mounting. MTBF of 100,000 hours or more.

Reliability and security. WWAN and WAN failover, multi-layer detection and automatic recovery mechanism, external watchdog timer, external RTC with backup battery. Firewall, ACL, port mapping, virtual IP mapping and IP-MAC binding.

Typical uses. Collecting data from serial equipment into supervision systems, using the Modbus and OPC UA protocols and the RS232 and RS485 links to PLCs.

Configuration. WebUI, local CLI, remote configuration, factory reset and backup, Syslog export locally or remotely.

See all specifications

Highlights

  • Dimensions: 126 × 44 x 166 mm (L×W×H)
  • Alert Tools: External RTC with Backup button battery
  • Ambient Humidity: 5 to 95% (non-condensing)
  • Antenna Connector: 2x 4G Cellular, 1x Wi-Fi, 1x GPS (Reserved)
  • Automatic Reboot Trigger: External WDT (watchdog timer)
  • Cellular module Slots: 1 x mPCIe slot for Cellular module

Good to know before integrating

  • Thermal: rated operating range -35 to 75°C (-31 to 167°F) — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote