EUKR416.1 – 4-channel 16 A KNX switch actuator

4-channel 16 A KNX switch actuator

KNX Actuators

  • 120V/240VAC~50/60Hz
  • 15mA/30VDC
  • ≤93%RH
  • -20°C~60°C
Manufacturer part number
EUKR416.1
Manufacturer
Euchips
Input Voltage
120V/240VAC~50/60Hz
Rated Current
15mA/30VDC

The Euchips EUKR416.1 is a KNX switch actuator with four 16 A channels, designed to switch lighting and loads on a KNX bus.

Product overview

Overview. The Euchips EUKR416.1 KNX switch actuator provides four 16 A output channels, rated for lighting loads with a maximum surge current of 500 A. It mounts on a 35 mm DIN rail in a flame-retardant nylon housing measuring 72 × 66 × 90 mm and weighs 257 g.

Main characteristics. The module controls its outputs over the KNX communication protocol. Rated current is 15 mA at 30 VDC, powered by a Class 2 supply rated 21 to 30 V DC. Mechanical lifetime exceeds 100,000 hours.

Wiring and environment. Input and output cables accept 2.5 to 4 mm², and the KNX terminal accepts 0.6 to 0.8 mm conductors. Ingress protection is IP20 according to EN 60529. Working temperature ranges from -5 °C to 45 °C, with working relative humidity up to 90 %.

Typical uses. This module suits switching of luminaires and loads in a KNX installation, connected to the bus and mounted on a DIN rail inside an electrical enclosure.

See all specifications

Highlights

  • Cable diameter of KNX terminal: 0.6-0.8mm
  • Communication Protocol: KNX
  • Electric capacity: <300μF
  • Housing Material: Flame-retardant nylon
  • Ingress protection grade: IP20, EN 60529
  • Input/output cable: 2.5-4mm²

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All KNX Actuators
Request a quote