L10
16S 100A BMS protection board for LiFePO4 and Li-ion battery packs

- Current
- 100A
- Current Protection
- ChargeOver current detection current
- Max working current
- Discharge 100A/Charge 100A
- Dimensions (mm)
- L220 *W100 *T15 mm
16S 100A BMS protection board for LiFePO4 and Li-ion battery packs
EYBMS protection board for 6 to 16 series cells, rated 100A continuous charge and discharge, designed for LiFePO4 and Li-ion battery packs.
Overview. The EYBMS PCM-L16S100-L10 is a battery management system (BMS) in the form of a PCM protection board for 6 to 16 series cells, designed for LiFePO4 and Li-ion battery packs. It is referenced PCM-L16S100-L10 and manufactured by EYBMS.
Main characteristics. 100A maximum current in both discharge and charge, dimensions of 220 x 100 x 15 mm, protection against overcharge, over-discharge, overcurrent and short circuit, with balancing function and temperature sensor function.
Voltages and thresholds. For a Li-ion (NMC) cell, the full charge voltage is 4.2V, giving 60V or 67.2V for the pack. For a LiFePO4 (LFP) cell, the full charge voltage is 3.60 to 3.65V, giving 48V or 51.2V for the pack. The overcharge threshold is 4.25 ±0.05V and the over-discharge threshold is 2.5 to 2.8V.
Typical uses. Light electric vehicles such as electric motorcycles, electric tricycles and e-bikes, new energy infrastructure such as solar streetlights and base station backup power, and home energy storage.
Integration. Output is made through a single port. Charge and discharge conditions must match the cell count and cell type of the pack.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for L10, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| After-sales | 1:1 replacement for defective units, technical support response within 24 hours |
| Balance type | Yes |
| Balancing capability | Larger cells require stronger balancing current |
| Battery Type | Li-ion/LiFePO4 |
| Cell type | LFP/NCM/Li-ion |
| Cell Type — Nominal Voltage — Full Charge Voltage | System Voltage |
| Cells Series | 6s-16s |
| Charge time | 100A charging a 200Ah pack takes ~2 hours |
| Curren | 100A |
| Current | 100A |
| Current Protection | ChargeOver current detection current |
| Dimensions (mm) | L220 *W100 *T15 mm |
| Full Charge Voltage — 3.60-3.65V | 4.2V |
| Function | Over charge protection, Over discharge protection, Over current protection, Short-circuit protection, Balance function,; Temperature sensor function. |
| Heat dissipation | Larger packs generate more heat during sustained high-current operation |
| Li-ion (NMC) — 3.6-3.7V — 4.2V | 60V / 67.2V |
| LiFePO₄ (LFP) — 3.2V — 3.6-3.65V | 48V / 51.2V |
| Light electric vehicles | electric motorcycles, electric tricycles, e-bikes |
| Max working current | Discharge 100A/Charge 100A |
| Modle | PCM-L16S100-L10 |
| Nominal Voltage — 3.2V | 3.6-3.7V |
| Output Method | Same port |
| Over-charge Protection | Balance voltage for single cell |
| Over discharge protection | Over discharge detection voltage |
| Over-discharge Protection — 2.0-2.5V | 2.5-2.8V |
| Overcharge Protection — 3.65±0.05V | 4.25±0.05V |
| Resistance | Main loop electrify resistance |
| Series | 6s -16s |
| Short protection | Detection condition |
| Size | PCM-L16S100-L10 |
| SIZE: L220 *W100 *T15 mm | SIZE: L220 *W100 *T15 mm |
| Supply Current | Normal operating mode current:Fuel gauge in NORMAL mode. ILOAD >Sleep Current |
| Temperature | Operating Temperature Range |
| Test item (Test at normal temperature 25±2℃) | Test item (Test at normal temperature 25±2℃) |
| Voltage | Charging voltage |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for L10. For a missing document or a specific revision, our experts send it to you.
EYBMS protection board for 6 to 16 series cells, rated 100A continuous charge and discharge, designed for LiFePO4 and Li-ion battery packs.
| Parameter | Value |
|---|---|
| After-sales | 1:1 replacement for defective units, technical support response within 24 hours |
| Balance type | Yes |
| Balancing capability | Larger cells require stronger balancing current |
| Battery Type | Li-ion/LiFePO4 |
| Cell type | LFP/NCM/Li-ion |
| Cell Type — Nominal Voltage — Full Charge Voltage | System Voltage |
| Cells Series | 6s-16s |
| Charge time | 100A charging a 200Ah pack takes ~2 hours |
| Curren | 100A |
| Current | 100A |
| Current Protection | ChargeOver current detection current |
| Dimensions (mm) | L220 *W100 *T15 mm |
| Full Charge Voltage — 3.60-3.65V | 4.2V |
| Function | Over charge protection, Over discharge protection, Over current protection, Short-circuit protection, Balance function,; Temperature sensor function. |
| Heat dissipation | Larger packs generate more heat during sustained high-current operation |
| Li-ion (NMC) — 3.6-3.7V — 4.2V | 60V / 67.2V |
| LiFePO₄ (LFP) — 3.2V — 3.6-3.65V | 48V / 51.2V |
| Light electric vehicles | electric motorcycles, electric tricycles, e-bikes |
| Max working current | Discharge 100A/Charge 100A |
| Modle | PCM-L16S100-L10 |
| Nominal Voltage — 3.2V | 3.6-3.7V |
| Output Method | Same port |
| Over-charge Protection | Balance voltage for single cell |
| Over discharge protection | Over discharge detection voltage |
| Over-discharge Protection — 2.0-2.5V | 2.5-2.8V |
| Overcharge Protection — 3.65±0.05V | 4.25±0.05V |
| Resistance | Main loop electrify resistance |
| Series | 6s -16s |
| Short protection | Detection condition |
| Size | PCM-L16S100-L10 |
| SIZE: L220 *W100 *T15 mm | SIZE: L220 *W100 *T15 mm |
| Supply Current | Normal operating mode current:Fuel gauge in NORMAL mode. ILOAD >Sleep Current |
| Temperature | Operating Temperature Range |
| Test item (Test at normal temperature 25±2℃) | Test item (Test at normal temperature 25±2℃) |
| Voltage | Charging voltage |
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
16S 100A BMS protection board for LiFePO4 and Li-ion battery packs

100% Original 10s Bms 60a

100% Original Bms 5s 18650

3s Bms 25a

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | L10 |
| Manufacturer | EYBMS |
BMS Boards
Multi-protocol BMS gateway for DIN rail · Ref. : HBGW04/R
Price on request
BMS Boards
BMS for 20S 72 V 150 A LiFePO4 battery packs
Price on request
BMS Boards
4S 25A BMS/PCM
Price on request
BMS Boards
12 V 310 Ah LiFePO4 under-seat lithium battery · Ref. : ULM-12-310H
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details