L16
16S 100A BMS protection board for Li-ion and LiFePO4 batteries

- Current
- 100A
- Current Protection
- ChargeOver current detection current
- Max working current
- Discharge 100A/Charge 100A
- Dimensions (mm)
- L190 *W100 *T12 mm
16S 100A BMS protection board for Li-ion and LiFePO4 batteries
16-cell 100A BMS protection board for Li-ion and LiFePO4 batteries, intended for 48 V energy storage packs and industrial applications.
Manufacturer and model. The EYBMS PCM-L16S100-L16 is a PCM-type battery management system (BMS) for 16-cell series (16S) packs, designed for Li-ion and LiFePO4 batteries.
Main characteristics. Maximum current of 100 A in discharge and in charge, charging voltage and overcurrent detection defined by the board. Cell balancing with a balance voltage for each single cell.
Protections. Protection against overcharge, over-discharge, overcurrent and short circuit, with short-circuit detection under the defined conditions. Integrated temperature sensor function.
Connection and output. Same-port output. Main loop electrify resistance to be considered when sizing the installation.
Dimensions and environment. Board dimensions L190 × W100 × T12 mm. Fuel gauge normal-mode supply current and operating temperature range as defined by the manufacturer.
Typical uses. Energy storage packs, solar installations, electric vehicles and industrial equipment using a 16S battery.
Integration. Board available on quotation from Atlas Electronics; the manufacturer states 1:1 replacement of defective units and technical support response within 24 hours.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for L16, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| After-sales | 1:1 replacement for defective units, technical support response within 24 hours |
| Balance type | Yes |
| Battery Type | Li-ion/LiFePO4 |
| Cell type | LFP/NCM/Li-ion |
| Cells Series | 16S |
| Curren | 100A |
| Current | 100A |
| Current Protection | ChargeOver current detection current |
| Dimensions (mm) | L190 *W100 *T12 mm |
| Function | Over charge protection, Over discharge protection, Over current protection, Short-circuit protection, Balance function,; Temperature sensor function. |
| Max working current | Discharge 100A/Charge 100A |
| Modle | PCM-L16S100-L16 |
| Output Method | Same port |
| Over-charge Protection | Balance voltage for single cell |
| Over discharge protection | Over discharge detection voltage |
| Resistance | Main loop electrify resistance |
| Series | 16S |
| Short protection | Detection condition |
| Size | PCM-L16S100-L16 |
| SIZE: L190 *W100 *T12 mm | SIZE: L190 *W100 *T12 mm |
| Supply Current | Normal operating mode current:Fuel gauge in NORMAL mode. ILOAD >Sleep Current |
| Temperature | Operating Temperature Range |
| Test item (Test at normal temperature 25±2℃) | Test item (Test at normal temperature 25±2℃) |
| Voltage | Charging voltage |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for L16. For a missing document or a specific revision, our experts send it to you.
16-cell 100A BMS protection board for Li-ion and LiFePO4 batteries, intended for 48 V energy storage packs and industrial applications.
| Parameter | Value |
|---|---|
| After-sales | 1:1 replacement for defective units, technical support response within 24 hours |
| Balance type | Yes |
| Battery Type | Li-ion/LiFePO4 |
| Cell type | LFP/NCM/Li-ion |
| Cells Series | 16S |
| Curren | 100A |
| Current | 100A |
| Current Protection | ChargeOver current detection current |
| Dimensions (mm) | L190 *W100 *T12 mm |
| Function | Over charge protection, Over discharge protection, Over current protection, Short-circuit protection, Balance function,; Temperature sensor function. |
| Max working current | Discharge 100A/Charge 100A |
| Modle | PCM-L16S100-L16 |
| Output Method | Same port |
| Over-charge Protection | Balance voltage for single cell |
| Over discharge protection | Over discharge detection voltage |
| Resistance | Main loop electrify resistance |
| Series | 16S |
| Short protection | Detection condition |
| Size | PCM-L16S100-L16 |
| SIZE: L190 *W100 *T12 mm | SIZE: L190 *W100 *T12 mm |
| Supply Current | Normal operating mode current:Fuel gauge in NORMAL mode. ILOAD >Sleep Current |
| Temperature | Operating Temperature Range |
| Test item (Test at normal temperature 25±2℃) | Test item (Test at normal temperature 25±2℃) |
| Voltage | Charging voltage |
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
16S 100A BMS protection board for Li-ion and LiFePO4 batteries

100% Original 10s Bms 60a

100% Original Bms 5s 18650

3s Bms 25a

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | L16 |
| Manufacturer | EYBMS |
BMS Boards
Multi-protocol BMS gateway for DIN rail · Ref. : HBGW04/R
Price on request
BMS Boards
BMS for 20S 72 V 150 A LiFePO4 battery packs
Price on request
BMS Boards
4S 25A BMS/PCM
Price on request
BMS Boards
12 V 310 Ah LiFePO4 under-seat lithium battery · Ref. : ULM-12-310H
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details