Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.
FT-F1 – Ultrasonic drone anemometer with RS485 output
Ultrasonic drone anemometer with RS485 output
- Manufacturer part number
- ANEMOMETER-FOR-DRONES
- Manufacturer
- Fengtu
FT-F1 ultrasonic anemometer from Fengtu, designed to be mounted on drones and small unmanned platforms to measure wind speed and direction at low altitude.
Product overview
Overview. The Fengtu FT-F1 anemometer, reference ANEMOMETER-FOR-DRONES, is an ultrasonic anemometer designed for drones and aircraft subject to size, weight and power constraints. It measures wind speed and direction in low-altitude areas.
Main characteristics. The sensor weighs 56 g with a diameter of 46 mm and a height of 48 mm. Wind speed is measured from 0 to 60 m/s with an accuracy of 3% and a resolution of 0.1 m/s. Wind direction is measured from 0 to 359° with an accuracy of ±3° and a resolution of 1°. The ABS housing offers strong anti-electromagnetic interference, waterproof and dustproof protection.
Interfaces and communication. The digital output is RS485, with a baud rate of 4800 to 19200. Communication protocols are ModBus and ASCII.
Power and environment. The power supply ranges from 5 to 30 VDC, with a consumption of 15 mA at 12 V. The sensor operates between -40 °C and +70 °C, at 0 to 100% humidity, and up to 4000 meters of altitude.
Typical uses. The FT-F1 is intended for drones and their flight control platforms, as well as environmental monitoring systems carried on aircraft. It can be mounted vertically on top of the aircraft or inverted on the bottom.
Integration. With its RS485 output and Modbus protocol, the anemometer can be connected to a controller or PLC to read wind data.
Technical questions
No published question about this part yet. Questions are reviewed before publication.
Compliance, lifecycle and traceability
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
Lifecycle and product statusStatus not stated
- In production
- Not recommended for new designs
- End of life
- Obsolete
| Current status | Status not stated |
| Key dates | Not recorded |
Manufacturer references
| Manufacturer part number | ANEMOMETER-FOR-DRONES |
| Manufacturer | Fengtu |