Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.
FT-GFS1 – Pipe wind speed sensor with hot-wire measurement
Pipe wind speed sensor with hot-wire measurement
- RS-485
- 4-20 mA current loop
- Manufacturer part number
- PIPE-WIND-SPEED-SENSOR
- Manufacturer
- Fengtu
Pipe wind speed sensor for measuring low air velocities in ventilation ducts, using the hot-wire principle, with RS485, 4-20 mA, 0-5 V and 0-10 V outputs.
Product overview
Fengtu FT-GFS1 is a pipe wind speed sensor for measuring small wind speeds in ventilation ducts. The manufacturer states high precision, low power consumption and full-range calibration.
Measurement principle. Wind speed is measured using the hot-wire balance principle, with a fast response time and a low starting wind speed. A full-scale secondary calibration method developed by the manufacturer provides good linearity and high accuracy. The measurement unit is sensitive and stable, with small drift.
Functions. The transmitter measures real-time duct wind speed and can calculate the air volume from the configured duct cross-sectional area.
Outputs and wiring. Signal outputs RS485, 4-20 mA, 0-5 V and 0-10 V. The military-grade spring-type screw-free terminal block accepts wire diameters from 0.3 to 2.0 mm. The default probe line length is 1 m and can be longer or shorter, up to 100 m according to the manufacturer, provided there is no interference around the cable.
Configuration. Device address, baud rate and duct cross-sectional area can be changed through RS485 commands. A professional configuration tool is provided for the RS485 type, and the RS485 slave address can be set through hardware DIP switches.
Installation. Open-hole flange mounting with a high-quality silicone sealing ring. The sensor must be installed on the side or bottom of the duct, never from top to bottom. A 20 mm hole is drilled in the duct, and the device orientation is adjusted so that its arrow follows the wind direction.
Technical questions
No published question about this part yet. Questions are reviewed before publication.
Compliance, lifecycle and traceability
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
Lifecycle and product statusStatus not stated
- In production
- Not recommended for new designs
- End of life
- Obsolete
| Current status | Status not stated |
| Key dates | Not recorded |
Manufacturer references
| Manufacturer part number | PIPE-WIND-SPEED-SENSOR |
| Manufacturer | Fengtu |