Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

JC-1.8A – Contact radar level sensor for liquids and solid powders

Contact radar level sensor for liquids and solid powders

  • mmWave radar
Manufacturer part number
RADAR-LEVEL-SENSOR
Manufacturer
Fengtu

The Fengtu JC-1.8A is a contact radar level sensor that measures the level of liquids and solid powders using microwave signals, suitable for different measurement applications and environments.

Product overview

Fengtu JC-1.8A, contact radar level sensor for liquids and solids — The JC-1.8A is a level transmitter that measures the level of liquids or solid powders using microwave signals. It is suitable for different measurement applications and for complex process conditions.

Measuring principle. The guided wave radar emits high-frequency microwave pulses along detection elements (steel cable or steel rod). On contact with the measured medium, the sudden change in dielectric constant causes part of the pulse energy to be reflected; the time interval between the transmitted and reflected pulses is proportional to the distance of the medium.

Measurement characteristics. Measuring range of 0 to 20 metres for liquids and 0 to 10 metres for solid powders. Frequency from 500 MHz to 1.8 GHz, single rod antenna, measuring accuracy ±10 mm.

Process conditions. Process temperature from -40 to 250 °C, process pressure from -0.1 to 4 MPa. Aluminium or plastic housing.

Interfaces and power supply. 4-20 mA/HART signal output, four-digit programmable LCD on-site display. Two-wire (DC24V) or four-wire (DC24V / AC220V) power supply.

Certification. Explosion-proof certification Exia IIC T6 Ga / Exd ia IIC T6 Gb, for hazardous areas.

Technology advantages. Small antenna, easy to install. Non-contact radar, without wear or pollution, almost unaffected by corrosion, foam, water vapour and atmospheric temperature and pressure changes. Smaller blind zone, high signal-to-noise ratio and narrow beam angle favouring reflection from inclined solid surfaces. High frequency, suited to measuring solids and low dielectric constant media.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote