Product overview
Hardkernel ODROID-M1S. ARM single board computer built around a quad-core Rockchip RK3566 processor, in its 4GB RAM version. Main characteristics — quad-core Cortex-A55 processor at 1.8GHz, ARMv8-A architecture with Neon and Crypto extensions, Mali-G52 GPU at 800MHz, LPDDR4 memory of 4 or 8 GiB on a 32-bit bus at 2112 MT/s. The integrated NPU provides 0.8 TOPS@INT8 and supports one-click switching between Caffe, TensorFlow, TFLite, ONNX, PyTorch, Keras and Darknet. Storage — 64GB eMMC soldered to the board, a microSD slot (UHS-I SDR104) whose boot priority is higher than the eMMC, and an M.2 NVMe slot (PCIe 2.1 x 1 lane). Connectivity and interfaces — one GbE RJ45 LAN port (10/100/1000 Mbps, Realtek RTL8211F transceiver), one USB 2.0 host port, one USB 3.0 host port, one USB 2.0 micro OTG port, a debug serial console (UART), a 40-pin GPIO and a 14-pin GPIO. Display — one HDMI 2.0 output up to 4K@60Hz with HDR, and a MIPI DSI interface on a 30-pin connector. Power and environment — USB Type C power (5V/3A adapter recommended) or DC input of 4.9V to 5.3V, about 1.1W idle and 3.52W under CPU stress, RTC backup battery connector. Dimensions 90mm x 65mm x 16mm, 52g including heatsink. Typical uses — embedded system development, image processing and AI inference with the NPU, and connection to PLCs through the GPIO and UART interfaces. Integration — the software Board-Support-Package includes bootloader, kernel, partition table and build instructions.