The ODROID-U3 is a Hardkernel ARM single board computer with an Exynos4412 quad-core 1.7 GHz processor and 2 GB of memory, running Linux or Android. Product discontinued.
Overview. The ODROID-U3 from Hardkernel is an ARM single board computer built around a Samsung Exynos4412 Prime Cortex-A9 quad-core processor clocked at 1.7 GHz with 1 MB of L2 cache. This product is discontinued.
Main characteristics. The board carries 2 GB of LP-DDR2 memory at a data rate of 880 Mega and offers a choice of storage: a MicroSD card slot or an eMMC module socket. Its PCB measures 83 x 48 mm and weighs 48 g including the heat sink.
Interfaces and connectivity. The board provides 10/100 Mbps Ethernet with an RJ-45 jack and Auto-MDIX support, three high speed USB 2.0 host type A ports and a USB 2.0 device port on micro USB. GPIO, UART, I2C and SPI pins are available, all IO ports being 1.8 V interface (SPI available from board revision 0.5). Video output is provided through a micro HDMI connector, and audio through a 3.5 mm headphone jack.
Power and software. The nominal power supply is 5 V 2 A (optional). The board runs Linux (Xubuntu 13.10 or later) or Android 4.x, and the full source code is available.
Typical uses. Its GPIO, UART, I2C and SPI ports allow control of peripherals and development of embedded applications under Linux, while its 1080p video playback via HDMI suits multimedia applications.
Video. The board supports 1080p playback via HDMI cable, with the H.264 and AAC based MP4 container format.
The ODROID-U3 is a Hardkernel ARM single board computer with an Exynos4412 quad-core 1.7 GHz processor and 2 GB of memory, running Linux or Android. Product discontinued.
GPIO, UART, I2C, SPI(Board Revision 0.5 or higher) : All the IO ports are 1.8Volt Interface.
LAN
10/100Mbps Ethernet with RJ-45 Jack ( Auto-MDIX support)
Memory
2048MB(2GB) LP-DDR2 880Mega data rate
PCB Size
83 x 48 mm
Power (Option)
5V 2A Power
Processor
Samsung Exynos4412 Prime Cortex-A9 Quad Core 1.7Ghz with 1MB L2 cache
Storage Option
MicroSD Card Slot; eMMC module socket
System Software
Linux : Xubuntu 13.10 or latest version; Android : u-boot 2010.12, Kernel 3.0.x, Android 4.x; Full source code is available now.
USB2.0 Device
ADB/Mass storage(Micro USB), Host mode is possible if the PCB Rev is 0.5 or higher.
USB2.0 Host
High speed standard A type connector x 3 ports
Video
supports 1080p via HDMI cable(H.264+AAC based MP4 container format)
Video OUT
micro HDMI connector
Weight
48g including the heat sink
Applications and use cases
Architectures in which G138745696275 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Charge-point controllers combine a metering and safety controller with a network link (Ethernet, Wi-Fi or cellular) toward a charge-point management system
To check
Outdoor temperature range and ingress protection
Metering accuracy requirements set by local regulation
Not every vision task justifies an industrial vision system. A Raspberry Pi with a camera module and an expansion board runs simple detection and counting models at low cost, close to the scene
To check
Frame rate and model size the board can run
Lighting and lens for the scene
Enclosure and cooling for the installation
Associated system blocks
ComputeCameras
Need a complete solution?
Send a request for G138745696275 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details