ODROID-C2 – Quad-Core ARM 64-bit Single Board Computer with 2 GB DDR3

Quad-Core ARM 64-bit Single Board Computer with 2 GB DDR3

ARM Single Board Computers

  • 2Gbyte DDR3 SDRAM
  • 2GB 32bit DDR3 912MHz
  • 10 / 100 / 1000 Mbit/s
  • 10bit SAR 2 channels
Manufacturer part number
G145457216438
Manufacturer
Hardkernel
Memory
2Gbyte DDR3 SDRAM
RAM
2GB 32bit DDR3 912MHz

Quad-core 64-bit ARM single board computer from Hardkernel, with 2 GB DDR3, Gigabit Ethernet and HDMI 2.0 4K video output. Discontinued product.

Product overview

Overview. The Hardkernel ODROID-C2 is a 64-bit quad-core ARM single board computer (SBC) based on the Amlogic S905 SoC at 1.5 GHz, intended for software development, prototyping and embedded control. This product is discontinued and no longer listed in the manufacturer's range.

Main characteristics. Amlogic S905 SoC with 4 ARM Cortex-A53 cores at 1.5 GHz (64-bit ARMv8 architecture, 28 nm), 3 x ARM Mali-450 MP GPU at 700 MHz, 2 GB DDR3 SDRAM, board size 85 x 56 mm, weight 40 g without heat sink, heat sink included.

Interfaces and connectivity. Ethernet 10/100/1000 Mbit/s, 4 USB 2.0 host ports and 1 USB 2.0 OTG port (device or host), microSD UHS-1 slot and eMMC 5.0 storage option, HDMI 2.0 4K at 60 Hz video output, HDMI / I2S audio output, on-board IR receiver. The 40 + 7 pin expansion connector provides GPIO, UART, I2C, I2S and 2 channels of 10-bit SAR analog-to-digital converter. Optional USB IEEE 802.11b/g/n WiFi module with antenna. USB 720p camera input.

Power and environment. 5 V 2 A power supply available as an option. No real-time clock unless an add-on module is fitted.

System and performance. Runs Ubuntu 16.04 and Android 5.1.x on kernel 3.14, full source code accessible. Measured results: mbw100 memory bandwidth 1472.856 MiB/s, Unixbench Dhrystone-2 2768.2, Double-Precision Whetstone 3076.8.

Typical uses. Home theater set-top box, software development workstation, hardware prototyping, home automation controller. The GPIO, UART and I2C lines allow connection of sensors and control peripherals.

See all specifications

Highlights

  • Analog-to-digital converter: 10bit SAR 2 channels
  • Audio output: HDMI / I2S
  • Camera Input: USB 720p
  • eMMC Read(MB/s): 125.0
  • eMMC Write(MB/s): 124.0
  • Ethernet (LAN): 10 / 100 / 1000 Mbit/s

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote