The Hardkernel ODROID-H2+ single board computer pairs an Intel Celeron J4115 processor with two 2.5GbE Ethernet ports and two DDR4 memory slots. Discontinued by the manufacturer.
Power consumptionIDLE : ≃ 4W
Dimensions110mm x 110mm x 47mm
A — CPU (Intel Celeron J4115 Processor) — K1 x DisplayPort 1.2
C — 1 x M.2 PCI Express Module Socket (NGFF-2280) — M5 x System LED Indicators
CPU+GPU Stress≃ 22W
CPU Stress≃1 4W
Product overview
Overview. The Hardkernel ODROID-H2+ is an x86 single board computer built around an Intel Celeron J4115 processor manufactured in 14 nm, with a clock of up to 2.5 GHz single-thread and 2.3 GHz multi-thread and a 4 MB L2 cache. The manufacturer states that this product is obsolete and no longer available.
Main characteristics. It provides two DDR4 1.2 V SO-DIMM slots in dual-channel mode, supporting up to 2400 MT/s (DDR4-PC19200), DDR3 memory not being supported. The processor integrates UHD Graphics 600 and a fanless design.
Interfaces and connectivity. Two RJ45 2.5GbE ports (10/100/1000/2500 Mbps, Realtek RTL8125B) support Wake-On-Lan. It offers two USB 3.0 ports, two USB 2.0 ports, one HDMI 2.0 port and one DisplayPort 1.2 supporting up to 4K@60Hz with dual simultaneous display. One M.2 NVMe slot (PCIe 2.0 x 4, NGFF-2280 cards), two SATA3 6 Gb/s connectors and a bootable eMMC socket are provided. A 24-pin expansion header provides two UART ports, two I2C buses and HDMI-CEC signals, all at 3.3 V logic level.
Power and environment. Power is supplied through a DC jack accepting 14 V to 20 V (up to 60 W), a 15 V/4 A adaptor being recommended. Power consumption is about 4 W at idle and about 22 W under CPU+GPU stress. Dimensions are 110 mm x 110 mm x 47 mm for a weight of 285 g including the heatsink.
Typical uses and integration. Its UART and I2C ports and expansion header allow connection to custom electronic equipment, while its 2.5GbE ports and 4K video outputs suit storage server or multi-display applications. Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Complete specifications
Every characteristic recorded for G200609380416, with where it comes from. Use the filters to find one quickly.
All specifications (28)
Characteristic
Value
Dimensions
110mm x 110mm x 47mm
Form factor
Dimensions: 110mm x 110mm x 47mm; Weight: 285 g including heatsink
A — CPU (Intel Celeron J4115 Processor) — K
1 x DisplayPort 1.2
Audio
1 x Audio out (3.5mm jack); 1 x Audio in (3.5mm jack); 1 x SPDIF out (ALC662, HDA codec)
B — 2 x DDR4 SO-DIMM slots (Dual channel memory support) — L
2 x RJ45 Ethernet Ports (10/100/1000/2500)
C — 1 x M.2 PCI Express Module Socket (NGFF-2280) — M
5 x System LED Indicators
CPU+GPU Stress
≃ 22W
CPU Stress
≃1 4W
D — 1 x eMMC (Embedded Multimedia-Card) Socket — N
1 x Peripheral Expansion Header (24-pin)
E — 2 x SATA Power Connectors(2.5mm pitch, JST-XH compatible) — O
1 x Power Switch
External I/O
2 x USB 3.0 Host ports; 2 x USB 2.0 Host ports; 1 x Peripheral Expansion Header (24-pin, 2.54mm pitch) 1 x DC 5V, 1 x DC 3.3V, 5 x GND; 2 x UART (TXD/RXD/RTS/CTS); 2 x I2C (SCL/SDA); 1 x External Power Button; HDMI-CEC, 5VA+, D+, D-; All 3.3V I/O signal level; Note that you have to connect an HDMI-CEC adapter board(sold separately) to the 24-pin header to use the HDMI CEC function.
F — 2 x SATA3 6.0 Gb/s Data Connectors — P
1 x Reset Switch
G — 1 x DC Power Jack — Q
1 x Backup Battery Connector (2-pin)
H — 2 x USB 3.0 — R
1 x Active Cooling Fan Connector (4-pin)
I — 2 x USB 2.0 — S
1 x Audio out; 1 x Audio in; 1 x SPDIF out
J — 1 x HDMI 2.0 — S
1 x Audio out; 1 x Audio in; 1 x SPDIF out
LED indicators (Green
Link, Amber: Traffic)
Memory
2 x DDR4 1.2V SO-DIMM slots; Dual Channel, up to 2400 MT/s (DDR4-PC19200); Max memory capacity 32GB DDR3 is not supported
Networking
2 x 2.5GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps); Realtek RTL8125B; Supports Wake-On-Lan; LED indicators (Green: Link, Amber: Traffic)
Power
1 x DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm; DC 14V ~ 20V (up to 60W) DC 15V/4A power adaptor is recommended; Power consumption: IDLE : ≃ 4W; CPU Stress : ≃1 4W; CPU+GPU Stress : ≃ 22W; Power-off : ≃ 0.5W; Suspend : ≃ 0.6W
Power consumption
IDLE : ≃ 4W
Power off
≃ 0.5W
Processor
Intel Celeron J4115 Processor (14nm, TDP 10W); Up to 2.5Ghz(Single Thread) or 2.3Ghz(Multi Thread); 4MB L2 Cache; UHD Graphics 600 (Gen 9.5 LP GT1 up to 700MHz); Fan-less design
Storage
1 x eMMC connector (bootable and selectable on BIOS) Various eMMC modules can be purchased at Hardkernel store; 2 x SATA3 6Gbps; 1 x M.2 NVMe slot (PCIe 2.0 x 4, supports NGFF-2280 cards) M.2 SATA SSD is not supported
Suspend
≃ 0.6W
System LEDS Indicators
Red (PWR) – Solid light when DC power is supplied
Video
1 x DisplayPort 1.2 (up to 4K@60Hz); 1 x HDMI 2.0 (up to 4K@60Hz); Dual simultaneous display support
Weight
285 g including heatsink
No specification matches.
Last verification : 2026-11-02
Technical documentation
Official documents and the technical data recorded for G200609380416. For a missing document or a specific revision, our experts send it to you.
The Hardkernel ODROID-H2+ single board computer pairs an Intel Celeron J4115 processor with two 2.5GbE Ethernet ports and two DDR4 memory slots. Discontinued by the manufacturer.
Power consumptionIDLE : ≃ 4W
Dimensions110mm x 110mm x 47mm
A — CPU (Intel Celeron J4115 Processor) — K1 x DisplayPort 1.2
C — 1 x M.2 PCI Express Module Socket (NGFF-2280) — M5 x System LED Indicators
CPU+GPU Stress≃ 22W
2. Datasheet extract (recorded values)
Parameter
Value
Dimensions
110mm x 110mm x 47mm
Form factor
Dimensions: 110mm x 110mm x 47mm; Weight: 285 g including heatsink
A — CPU (Intel Celeron J4115 Processor) — K
1 x DisplayPort 1.2
Audio
1 x Audio out (3.5mm jack); 1 x Audio in (3.5mm jack); 1 x SPDIF out (ALC662, HDA codec)
B — 2 x DDR4 SO-DIMM slots (Dual channel memory support) — L
2 x RJ45 Ethernet Ports (10/100/1000/2500)
C — 1 x M.2 PCI Express Module Socket (NGFF-2280) — M
5 x System LED Indicators
CPU+GPU Stress
≃ 22W
CPU Stress
≃1 4W
D — 1 x eMMC (Embedded Multimedia-Card) Socket — N
1 x Peripheral Expansion Header (24-pin)
E — 2 x SATA Power Connectors(2.5mm pitch, JST-XH compatible) — O
1 x Power Switch
External I/O
2 x USB 3.0 Host ports; 2 x USB 2.0 Host ports; 1 x Peripheral Expansion Header (24-pin, 2.54mm pitch) 1 x DC 5V, 1 x DC 3.3V, 5 x GND; 2 x UART (TXD/RXD/RTS/CTS); 2 x I2C (SCL/SDA); 1 x External Power Button; HDMI-CEC, 5VA+, D+, D-; All 3.3V I/O signal level; Note that you have to connect an HDMI-CEC adapter board(sold separately) to the 24-pin header to use the HDMI CEC function.
F — 2 x SATA3 6.0 Gb/s Data Connectors — P
1 x Reset Switch
G — 1 x DC Power Jack — Q
1 x Backup Battery Connector (2-pin)
H — 2 x USB 3.0 — R
1 x Active Cooling Fan Connector (4-pin)
I — 2 x USB 2.0 — S
1 x Audio out; 1 x Audio in; 1 x SPDIF out
J — 1 x HDMI 2.0 — S
1 x Audio out; 1 x Audio in; 1 x SPDIF out
LED indicators (Green
Link, Amber: Traffic)
Memory
2 x DDR4 1.2V SO-DIMM slots; Dual Channel, up to 2400 MT/s (DDR4-PC19200); Max memory capacity 32GB DDR3 is not supported
Networking
2 x 2.5GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps); Realtek RTL8125B; Supports Wake-On-Lan; LED indicators (Green: Link, Amber: Traffic)
Power
1 x DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm; DC 14V ~ 20V (up to 60W) DC 15V/4A power adaptor is recommended; Power consumption: IDLE : ≃ 4W; CPU Stress : ≃1 4W; CPU+GPU Stress : ≃ 22W; Power-off : ≃ 0.5W; Suspend : ≃ 0.6W
Power consumption
IDLE : ≃ 4W
Power off
≃ 0.5W
Processor
Intel Celeron J4115 Processor (14nm, TDP 10W); Up to 2.5Ghz(Single Thread) or 2.3Ghz(Multi Thread); 4MB L2 Cache; UHD Graphics 600 (Gen 9.5 LP GT1 up to 700MHz); Fan-less design
Storage
1 x eMMC connector (bootable and selectable on BIOS) Various eMMC modules can be purchased at Hardkernel store; 2 x SATA3 6Gbps; 1 x M.2 NVMe slot (PCIe 2.0 x 4, supports NGFF-2280 cards) M.2 SATA SSD is not supported
Suspend
≃ 0.6W
System LEDS Indicators
Red (PWR) – Solid light when DC power is supplied
Video
1 x DisplayPort 1.2 (up to 4K@60Hz); 1 x HDMI 2.0 (up to 4K@60Hz); Dual simultaneous display support
Weight
285 g including heatsink
Applications and use cases
Architectures in which G200609380416 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Charge-point controllers combine a metering and safety controller with a network link (Ethernet, Wi-Fi or cellular) toward a charge-point management system
To check
Outdoor temperature range and ingress protection
Metering accuracy requirements set by local regulation
Not every vision task justifies an industrial vision system. A Raspberry Pi with a camera module and an expansion board runs simple detection and counting models at low cost, close to the scene
To check
Frame rate and model size the board can run
Lighting and lens for the scene
Enclosure and cooling for the installation
Associated system blocks
ComputeCameras
Need a complete solution?
Send a request for G200609380416 and the other parts of your project.
Answers to the questions that the recorded characteristics of G200609380416 can answer. A question is not asked when nothing is recorded to answer it.
1Does it support CAN bus?
Yes — recorded under "Storage": 1 x eMMC connector (bootable and selectable on BIOS) Various eMMC modules can be purchased at Hardkernel store; 2 x SATA3 6Gbps; 1 x M.2 NVMe slot (PCIe 2.0 x 4, supports NGFF-2280 cards) M.2 SATA SSD is not supported.
2Does it support I2C?
Yes — recorded under "External I/O": 2 x USB 3.0 Host ports; 2 x USB 2.0 Host ports; 1 x Peripheral Expansion Header (24-pin, 2.54mm pitch) 1 x DC 5V, 1 x DC 3.3V, 5 x GND; 2 x UART (TXD/RXD/RTS/CTS); 2 x I2C (SCL/SDA); 1 x External Power Button; HDMI-CEC, 5VA+, D+, D-; All 3.3V I/O signal level; Note that you have to connect an HDMI-CEC adapter board(sold separately) to the 24-pin header to use the HDMI CEC function..
3Does it have an Ethernet port?
Yes — recorded under "B — 2 x DDR4 SO-DIMM slots (Dual channel memory support) — L": 2 x RJ45 Ethernet Ports (10/100/1000/2500).
4Does it have a USB interface?
Yes — recorded under "External I/O": 2 x USB 3.0 Host ports; 2 x USB 2.0 Host ports; 1 x Peripheral Expansion Header (24-pin, 2.54mm pitch) 1 x DC 5V, 1 x DC 3.3V, 5 x GND; 2 x UART (TXD/RXD/RTS/CTS); 2 x I2C (SCL/SDA); 1 x External Power Button; HDMI-CEC, 5VA+, D+, D-; All 3.3V I/O signal level; Note that you have to connect an HDMI-CEC adapter board(sold separately) to the 24-pin header to use the HDMI CEC function..
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productHardkernel
G200609380416
Single board computer with Intel Celeron J4115 and dual 2.5GbE
Power consumption
IDLE : ≃ 4W
Dimensions
110mm x 110mm x 47mm
A — CPU (Intel Celeron J4115 Processor) — K
1 x DisplayPort 1.2
C — 1 x M.2 PCI Express Module Socket (NGFF-2280) — M
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details