Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

ODROID-HC4 – ARM Cortex-A55 SBC with 2 SATA ports for NAS and OLED

ARM Cortex-A55 SBC with 2 SATA ports for NAS and OLED

ARM Single Board Computers

  • Arm architecture
Manufacturer part number
G201014154360
Manufacturer
Hardkernel

ARM single board computer in toaster form factor, designed as a home-cloud platform with two SATA ports and a quad-core Cortex-A55 processor.

Product overview

Overview. The Hardkernel ODROID-HC4 is an ARM single board computer (SBC) in toaster form factor, designed as a home-cloud platform. It uses an Amlogic S905X3 quad-core Cortex-A55 processor clocked at 1.8 GHz, fabricated in 12 nm, with 4 GB of DDR4 memory.

Main characteristics. The 4 GB DDR4 memory runs on a 32-bit bus at 2640 MT/s (PC4-21333 grade), with a 1.2 V low power design. The Mali-G31 MP2 GPU clocked at 650 MHz handles graphics.

Interfaces and connectivity. The board provides two SATA ports for 2.5 or 3.5 inch drives, one RJ45 Ethernet port 10/100/1000 Mbps (Realtek RTL8211F), one HDMI 2.0 output supporting up to 4K@60Hz with HDR, two USB 2.0 host ports, a micro SD slot compatible with UHS-I SDR104, an IR receiver and a debug serial console (UART). Five GPIO pins support the optional OLED display.

Power and environment. Power is supplied through a 5.5 mm x 2.1 mm DC jack with a 14.5 V to 15.5 V input; a 15 V / 4 A adaptor is recommended and sold separately. Measured consumption with two ST2000DM006 drives is about 5.88 W at idle with drives spun down, 15.59 W when active using SAMBA, and 0.29 W in suspend. A 40 x 40 x 10.6 mm fan and a passive heatsink provide cooling. Board dimensions are 84 x 90.5 x 25 mm, and the weight is 280 g including heatsink, fan and case.

Typical uses. The form factor and two SATA ports suit a network-attached storage (NAS) server under Linux, with disks combined in RAID 0 or RAID 1 via LVM or mdadm. The manufacturer measured SATA throughput of 390 to 420 MB/s, and SMB/CIFS file transfer over Gigabit Ethernet exceeds 100 MB/s.

Integration. The manufacturer reports an SoC temperature of about 50 to 60 °C under heavy load without thermal throttling, at a chamber temperature of 30 °C. The board is available on quotation from Atlas Electronics.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote