The 4GB LPDDR4 Hardkernel ODROID-M1 is an ARM single board computer based on the quad-core Cortex-A55 Rockchip RK3568B2 SoC. It provides a 0.8Tops NPU, a PCIe 3.0 M.2 NVMe slot, a SATA 3.0 port, and Gigabit Ethernet.
B — LPDDR4 RAM — O1 x SPI recovery Switch
D — 1 x RJ45 Ethernet Port (10/100/1000) — Q1 x eMMC Module Socket
C — 1 x Micro USB2.0 Device only — P1 x SPI Flash 16MiB
Dual head display featureHDMI and MIPI-DSI at the same time
E — 1 x HDMI 2.0 — R1 x IR Receiver
F — 2 x USB 2.0 — S1 x RTC Backup Battery Holder
Product overview
Overview. The Hardkernel ODROID-M1 (4GByte RAM version) is an ARM single board computer built for embedded systems and industrial control. It features the quad-core ARM Cortex-A55 Rockchip RK3568B2 processor running at up to 1.992GHz, a Mali-G52 MP2 GPU at 650Mhz, and an integrated 0.8Tops@INT8 RKNN NPU AI accelerator supporting Caffe, TensorFlow, TFLite, ONNX, PyTorch, Keras, and Darknet.
Memory and storage. Equipped with 4GiB of 32-bit LPDDR4 RAM (3120 MT/s, up to 1,560MHz) and 16MiB SPI Flash with pre-installed Petitboot, the board offers versatile storage options: an eMMC module socket, a Micro SD slot (up to UHS-I SDR104), an M.2 NVMe M-Key PCIe 3.0 2-Lane slot for 22mm x 80mm SSDs achieving 1646 MB/s sequential read speed, and a native SATA 3.0 interface.
Interfaces and multimedia. Dual simultaneous display output is provided via HDMI 2.0 (up to 4K@60Hz with HDR, EDID) and a 4-lane MIPI-DSI port (31 pin) for 800 x 1280 LCD displays. I/O interfaces include a 2-lane MIPI-CSI camera connector (15 pin), one RJ45 GbE LAN port (10/100/1000 Mbps, Realtek RTL8211F), 2 USB 3.0 host ports, 2 USB 2.0 host ports, 1 Micro USB2.0 port, a debug UART console, a 40pin GPIO header, a 3.5mm audio jack, and a 1.3W mono speaker output.
Power and dimensions. With board dimensions of 90mm x 122mm x 16mm and a 100mm x 123mm x 19mm heatsink (253 g total weight), it operates from a 7.5V ~ 15.5V DC input on a 5.5mm / 2.1mm jack (12V/2A recommended), drawing roughly 1.25W at idle and 4.44W under CPU stress.
No published question about this part yet. Questions are reviewed before publication.
Complete specifications
Every characteristic recorded for G220308142749, with where it comes from. Use the filters to find one quickly.
All specifications (30)
Characteristic
Value
Form factor
Board Dimensions: 90mm x 122mm x 16mm; Heatsink Dimensions: 100mm x 123mm x 19mm; Weight: 253 g including heatsink
A — Rockchip RK3568B2 CPU — N
1 x Mono Speaker Output (1.3W at 8Ω load)
Audio
1 x 3.5mm phone jack; 1 x mono speaker output; 1 x HDMI sound
B — LPDDR4 RAM — O
1 x SPI recovery Switch
C — 1 x Micro USB2.0 Device only — P
1 x SPI Flash 16MiB
D — 1 x RJ45 Ethernet Port (10/100/1000) — Q
1 x eMMC Module Socket
Dual head display feature
HDMI and MIPI-DSI at the same time
E — 1 x HDMI 2.0 — R
1 x IR Receiver
External I/O
2 x USB 2.0 host port; 2 x USB 3.0 host port (or 1 x USB 3.0 host + 1 x USB 2.0 OTG port); 1 x Debug serial console (UART, 1.5Mbps N81); 1 x SATA Connector; 1 x MIPI-CSI Camera Interface (15 pin); 1 x MIPI-DSI LCD Interface (31 pin); 1 x 40pin GPIO header
F — 2 x USB 2.0 — S
1 x RTC Backup Battery Holder
fio 1M sequential read
1646 MB/s
G — 2 x USB 3.0 — T
1 x Reset jumper; 1 x Power jumper
H — 1 x DC Power Jack — U
1 x Micro SD Slot
I — 1 x M.2 NVMe M-Key PCIe3.0 2-Lane — V
1 x SATA3
iozone 1M random read
1049.13 MB/s
iozone 1M random write
1163.95 MB/s
iozone 4K random read
43.73 MB/s
iozone 4K random write
96.90 MB/s
J — 40 x GPIO Pins — W
1 x SATA Power (5volt only)
K — 1 x MIPI CSI 2Lane — X
1 x UART for System Console
L — 1 x MIPI DSI 4Lane — Y
2 x System LED Indicators
M — 1 x 3.5mm Headphone Jack — Z
1 x M.2 LED Indicator
Memory
4 or 8GiB LPDDR4 with 32-bit bus width; Data rate: 3120 MT/s, up to 1,560MHz
Networking
1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps); – Realtek RTL8211F (Ethernet transceiver); – LED indicators; * Green LED: Flashing by data traffics at 100Mbps connection; * Amber LED: Flashing by data traffics at 1000Mbps connection
NPU
0.8Tops@INT8, integrated high-performance AI accelerator RKNN NPU; Supports one-click switching of Caffe/ TensorFlow /TFLite/ONNX/ PyTorch /Keras/Darknet
Other features
IR receiver for remote controller; RTC and backup battery holder (to keep time and date for several months without main power input); System LED Indicators:; – Red (POWER) – Solid light when DC power is connected; – Blue (ALIVE) – Flashing “heartbeat” while Kernel is running. Solid On when in the u-boot stage.
Power
1 x DC jack : outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm; DC input : 7.5V ~ 15.5V; – DC 12V/2A power adapter is recommended; – IDLE : ≃ 1.25W; – CPU Stress : ≃ 4.44W (Performance governor); – Power Off : ≃ 0W
Processor
Rockchip RK3568 Processor; L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor; L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor; L3 data cache: 512KB, 16-way set associative (512 sets), 64 byte lines, shared by 4 processorsQuad-Core Cortex-A55 (1.992GHz); ARMv8-A architecture with Neon and Crypto extensions; Mali-G52 MP2 GPU with 4 x Execution Engines (650Mhz)
Storage
1 x eMMC slot; 1 x Micro SD slot (DS/HS mode up to UHS-I SDR104); 1 x NVME M.2 SSD (PCIe 3.0 x 2); 1 x SATA3.0
Video
1 x HDMI 2.0 (up to 4K@60Hz with HDR, EDID); 1 x MIPI-DSI (works with 800 x 1280 LCD)
No specification matches.
Last verification : 2026-11-02
Technical documentation
Official documents and the technical data recorded for G220308142749. For a missing document or a specific revision, our experts send it to you.
The 4GB LPDDR4 Hardkernel ODROID-M1 is an ARM single board computer based on the quad-core Cortex-A55 Rockchip RK3568B2 SoC. It provides a 0.8Tops NPU, a PCIe 3.0 M.2 NVMe slot, a SATA 3.0 port, and Gigabit Ethernet.
B — LPDDR4 RAM — O1 x SPI recovery Switch
D — 1 x RJ45 Ethernet Port (10/100/1000) — Q1 x eMMC Module Socket
C — 1 x Micro USB2.0 Device only — P1 x SPI Flash 16MiB
Dual head display featureHDMI and MIPI-DSI at the same time
E — 1 x HDMI 2.0 — R1 x IR Receiver
2. Datasheet extract (recorded values)
Parameter
Value
Form factor
Board Dimensions: 90mm x 122mm x 16mm; Heatsink Dimensions: 100mm x 123mm x 19mm; Weight: 253 g including heatsink
A — Rockchip RK3568B2 CPU — N
1 x Mono Speaker Output (1.3W at 8Ω load)
Audio
1 x 3.5mm phone jack; 1 x mono speaker output; 1 x HDMI sound
B — LPDDR4 RAM — O
1 x SPI recovery Switch
C — 1 x Micro USB2.0 Device only — P
1 x SPI Flash 16MiB
D — 1 x RJ45 Ethernet Port (10/100/1000) — Q
1 x eMMC Module Socket
Dual head display feature
HDMI and MIPI-DSI at the same time
E — 1 x HDMI 2.0 — R
1 x IR Receiver
External I/O
2 x USB 2.0 host port; 2 x USB 3.0 host port (or 1 x USB 3.0 host + 1 x USB 2.0 OTG port); 1 x Debug serial console (UART, 1.5Mbps N81); 1 x SATA Connector; 1 x MIPI-CSI Camera Interface (15 pin); 1 x MIPI-DSI LCD Interface (31 pin); 1 x 40pin GPIO header
F — 2 x USB 2.0 — S
1 x RTC Backup Battery Holder
fio 1M sequential read
1646 MB/s
G — 2 x USB 3.0 — T
1 x Reset jumper; 1 x Power jumper
H — 1 x DC Power Jack — U
1 x Micro SD Slot
I — 1 x M.2 NVMe M-Key PCIe3.0 2-Lane — V
1 x SATA3
iozone 1M random read
1049.13 MB/s
iozone 1M random write
1163.95 MB/s
iozone 4K random read
43.73 MB/s
iozone 4K random write
96.90 MB/s
J — 40 x GPIO Pins — W
1 x SATA Power (5volt only)
K — 1 x MIPI CSI 2Lane — X
1 x UART for System Console
L — 1 x MIPI DSI 4Lane — Y
2 x System LED Indicators
M — 1 x 3.5mm Headphone Jack — Z
1 x M.2 LED Indicator
Memory
4 or 8GiB LPDDR4 with 32-bit bus width; Data rate: 3120 MT/s, up to 1,560MHz
Networking
1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps); – Realtek RTL8211F (Ethernet transceiver); – LED indicators; * Green LED: Flashing by data traffics at 100Mbps connection; * Amber LED: Flashing by data traffics at 1000Mbps connection
NPU
0.8Tops@INT8, integrated high-performance AI accelerator RKNN NPU; Supports one-click switching of Caffe/ TensorFlow /TFLite/ONNX/ PyTorch /Keras/Darknet
Other features
IR receiver for remote controller; RTC and backup battery holder (to keep time and date for several months without main power input); System LED Indicators:; – Red (POWER) – Solid light when DC power is connected; – Blue (ALIVE) – Flashing “heartbeat” while Kernel is running. Solid On when in the u-boot stage.
Power
1 x DC jack : outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm; DC input : 7.5V ~ 15.5V; – DC 12V/2A power adapter is recommended; – IDLE : ≃ 1.25W; – CPU Stress : ≃ 4.44W (Performance governor); – Power Off : ≃ 0W
Processor
Rockchip RK3568 Processor; L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor; L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor; L3 data cache: 512KB, 16-way set associative (512 sets), 64 byte lines, shared by 4 processorsQuad-Core Cortex-A55 (1.992GHz); ARMv8-A architecture with Neon and Crypto extensions; Mali-G52 MP2 GPU with 4 x Execution Engines (650Mhz)
Storage
1 x eMMC slot; 1 x Micro SD slot (DS/HS mode up to UHS-I SDR104); 1 x NVME M.2 SSD (PCIe 3.0 x 2); 1 x SATA3.0
Video
1 x HDMI 2.0 (up to 4K@60Hz with HDR, EDID); 1 x MIPI-DSI (works with 800 x 1280 LCD)
Applications and use cases
Architectures in which G220308142749 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Charge-point controllers combine a metering and safety controller with a network link (Ethernet, Wi-Fi or cellular) toward a charge-point management system
To check
Outdoor temperature range and ingress protection
Metering accuracy requirements set by local regulation
Not every vision task justifies an industrial vision system. A Raspberry Pi with a camera module and an expansion board runs simple detection and counting models at low cost, close to the scene
To check
Frame rate and model size the board can run
Lighting and lens for the scene
Enclosure and cooling for the installation
Associated system blocks
ComputeCameras
Need a complete solution?
Send a request for G220308142749 and the other parts of your project.
Answers to the questions that the recorded characteristics of G220308142749 can answer. A question is not asked when nothing is recorded to answer it.
1Does it support SPI?
Yes — recorded under "B — LPDDR4 RAM — O": 1 x SPI recovery Switch.
2Does it have an Ethernet port?
Yes — recorded under "D — 1 x RJ45 Ethernet Port (10/100/1000) — Q": 1 x eMMC Module Socket.
3Does it have a USB interface?
Yes — recorded under "External I/O": 2 x USB 2.0 host port; 2 x USB 3.0 host port (or 1 x USB 3.0 host + 1 x USB 2.0 OTG port); 1 x Debug serial console (UART, 1.5Mbps N81); 1 x SATA Connector; 1 x MIPI-CSI Camera Interface (15 pin); 1 x MIPI-DSI LCD Interface (31 pin); 1 x 40pin GPIO header.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productHardkernel
G220308142749
Quad-core RK3568B2 ARM single board computer with 4GiB LPDDR4 RAM
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details