Hardkernel ODROID-N2L. ARM single board computer (SBC) built on the Amlogic S922X, low-cost variant of the ODROID-N2+, in a compact 69 x 56 mm form factor. The manufacturer lists this product as discontinued.
Processor and memory. Amlogic S922X processor on 12 nm, with four Cortex-A73 cores at 2.2 GHz and two Cortex-A53 cores at 2 GHz, ARMv8-A architecture with Neon and Crypto extensions, and Mali-G52 GPU with 6 execution engines (800 MHz). 4 GiB LPDDR4 memory on a 32-bit bus, data rate of 3216 MT/s, 1.1 V low power design.
Storage and video. microSD slot (DS/HS modes up to UHS-I SDR104), eMMC connector (8, 16, 32, 64 or 128 GB available) and HDMI 2.0 output up to 4K@60Hz with HDR, CEC and EDID.
Interfaces and connectivity. 1 USB 3.0 host port, 1 USB 2.0 host port, debug serial console (UART), 1 MIPI DSI 4-lane connector (TBD), and a 40-pin peripheral expansion header at 2.54 mm pitch, providing SPI, UART, 2 x I2C, 25 GPIO maximum and 2 x 10-bit ADC inputs (1.8 V max). I/O signals are at 3.3 V, except the ADC inputs. Wireless or Ethernet connectivity is possible through optional USB adapters.
Power and environment. DC power jack with a recommended input range of 7.5 V to 16 V, 12 V/2 A adapter recommended. Consumption of about 1.5 W at idle and about 5.4 W under CPU stress with passive heatsink (5.8 W when overclocked), about 0.2 W when powered off. Large passive heatsink and 5 V 2-pin fan connector for active cooling. Red (PWR) and blue (ALIVE) LEDs indicate system status.
Typical uses. Standalone embedded systems that do not require Ethernet connectivity, robots, drones, arcade consoles and human-machine-interface devices, according to the manufacturer.
Integration. The 40-pin expansion header with I2C and SPI buses facilitates connection of sensors and peripherals. The stock fan must keep rotating during heavy loads at 2.4 GHz to avoid thermal throttling.