Hardkernel ODROID-M2 ARM single board computer with 8 GB LPDDR5, RK3588S2 processor and a 6 TOPS NPU, designed for high-performance embedded systems.
MemoryLPDDR5 8 or 16GiB with 64-bit bus width
D — 1 x Ethernet Transformer — N1 x Power Button
E — 1 x RJ45 Ethernet Port (10/100/1000) — O1 x Reset Button
A — Rockchip RK3588S2 CPU — K1 x MIPI DSI 4 Lanes
B — 2 x LPDDR5 chips — L1 x M.2 LED Indicator
C — 1 x 64GB eMMC on-board — M1 x Micro-SD Slot
Product overview
Overview. The Hardkernel ODROID-M2 is an ARM single board computer (SBC) measuring 90 mm x 90 mm, with 8 GB of LPDDR5 memory on a 64-bit bus and the Rockchip RK3588S2 processor.
Processor and acceleration. The RK3588S2 combines four Cortex-A76 cores at 2.3 GHz and four Cortex-A55 cores at 1.8 GHz, with a Mali-G610 MP4 GPU at 1 GHz and an RKNN NPU delivering 6 TOPS@INT8 for embedded artificial intelligence.
Storage. A 64 GB eMMC is soldered to the board, complemented by a UHS-I SDR104 micro-SD slot and an M.2 M-KEY PCIe 2.1 single-lane slot for NVMe SSD. A slide switch selects the boot priority between eMMC and micro-SD.
Connectivity and interfaces. One RJ45 GbE port (10/100/1000 Mbps), one USB 2.0 host port, one USB 3.0 host port, one USB 3.0 Type-C port with DP Alt-mode, one HDMI 2.0 port (up to 4K@60Hz with HDR), one MIPI DSI interface on a 30-pin connector, a debug serial console (UART) and 40-pin and 14-pin GPIO connectors.
Power and environment. DC jack power supply, input range 7.5 V to 15.5 V (12 V/2 A adapter recommended). Consumption of about 1 W at idle without peripherals and about 7.5 W under CPU stress. Real-time clock PCF8536 with CR2032 backup battery holder.
Typical uses. Embedded systems requiring multicore computing, dual 4K display, GPU-accelerated graphics, AI inference on the NPU or NVMe storage expansion.
Integration. The GPIO connectors and UART console ease development and connection of sensors and actuators. Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Complete specifications
Every characteristic recorded for G240813135632, with where it comes from. Use the filters to find one quickly.
All specifications (26)
Characteristic
Value
Form factor
Board Dimensions: 90mm x 90mm x 21mm; Weight: 78g including heatsink, 58g without heatsink
A — Rockchip RK3588S2 CPU — K
1 x MIPI DSI 4 Lanes
B — 2 x LPDDR5 chips — L
1 x M.2 LED Indicator
C — 1 x 64GB eMMC on-board — M
1 x Micro-SD Slot
D — 1 x Ethernet Transformer — N
1 x Power Button
E — 1 x RJ45 Ethernet Port (10/100/1000) — O
1 x Reset Button
External I/O
1 x USB 2.0 host port; 1 x USB 3.0 host port; 1 x USB 3.0 Type-C (Data communication and DP Alt-Mode, Not a power source/sink); 1 x Debug serial console (UART); 1 x 40 pin GPIO and 1 x 14 pin GPIO
F — 1 x USB 3.0 Type C with Alt-mod DP — P
40 x GPIO Pins
G — 1 x USB 2.0 host — Q
14 x GPIO Pins
H — 1 x HDMI — R
1 x RTC backup battery holder
I — 1 x USB 3.0 host — S
1 x UART for System Console
iozone 1M random read
273.25 MB/s
iozone 1M random write
254.15 MB/s
iozone 4K random read
27.86 MB/s
iozone 4K random write
52.9 MB/s
J — 1x DC Power Jack — T
1 x M.2. M-KEY PCIe2.1 1 Lane
Memory
LPDDR5 8 or 16GiB with 64-bit bus width
Networking
1 x GbE port (RJ45, supports 10/100/1000 Mbps); – LED indicators; * Green LED: Flashing by data traffics at 100Mbps connection; * Amber LED: Flashing by data traffics at 1000Mbps connection
NPU
6 TOPS@INT8, Integrated AI accelerator RKNN NPU
Other features
* Power button; * Reset button; * System LED Indicators:; – Red (POWER) – Solid light when DC power is connected; – Blue (ALIVE) – Flashing like heartbeat while Kernel is running. Solid On in the u-boot stage.
Power
1 x DC jack: outer (negative) diameter 5.5mm inner (positive) diameter 2.1mm; DC input voltage range: 7.5V ~ 15.5V (12V/2A power adapter is recommended); – IDLE : ≃ 1W without any kind of peripherals; – CPU Stress : ≃ 7.5W (Performance governor) without any kind of peripherals; – Power Off : ≃ 0W
Processor
Rockchip RK3588S2 Processor; Quad-Core Cortex-A76 (2.3GHz +/- 0.1Ghz); Quad-Core Cortex-A55 (1.8GHz); ARMv8-A architecture with Neon and Crypto extensions; Mali-G610 GPU MP4 (1Ghz)64KB L1 instruction cache, 64KB L1 data cache, 512KB L2 cache, shared by Cortex-A76 processor; 32KB L1 instruction cache, 32KB L1 data cache, 128KB L2 cache, shared by Cortex-A55 processor; L3 data cache: 3MB, shared by 8 processors
Real-time clock
* On-board very low power PCF8536 RTC chip; * CR2032 RTC backup battery holder to keep time and date for near 10 years without main power input
Storage
1 x 64GB eMMC embedded (soldered to the PCB); 1 x Micro SD slot (UHS-I SDR104); * Boot priority between eMMC and microSD can be selected with the slide switch; 1 x NVME M.2 SSD (PCIe 2.1 x 1 lane)
U
1x Slide Switch (Boot mode select)
Video Output
1 x HDMI® 2.0 (up to 4K@60Hz with HDR, EDID); 1 x MIPI DSI Interface (30pin connector which is different from 31pin of the ODROID-M1); 1 x DP (via USB Type-C port)
No specification matches.
Last verification : 2026-11-02
Technical documentation
Official documents and the technical data recorded for G240813135632. For a missing document or a specific revision, our experts send it to you.
Hardkernel ODROID-M2 ARM single board computer with 8 GB LPDDR5, RK3588S2 processor and a 6 TOPS NPU, designed for high-performance embedded systems.
MemoryLPDDR5 8 or 16GiB with 64-bit bus width
D — 1 x Ethernet Transformer — N1 x Power Button
E — 1 x RJ45 Ethernet Port (10/100/1000) — O1 x Reset Button
A — Rockchip RK3588S2 CPU — K1 x MIPI DSI 4 Lanes
B — 2 x LPDDR5 chips — L1 x M.2 LED Indicator
2. Datasheet extract (recorded values)
Parameter
Value
Form factor
Board Dimensions: 90mm x 90mm x 21mm; Weight: 78g including heatsink, 58g without heatsink
A — Rockchip RK3588S2 CPU — K
1 x MIPI DSI 4 Lanes
B — 2 x LPDDR5 chips — L
1 x M.2 LED Indicator
C — 1 x 64GB eMMC on-board — M
1 x Micro-SD Slot
D — 1 x Ethernet Transformer — N
1 x Power Button
E — 1 x RJ45 Ethernet Port (10/100/1000) — O
1 x Reset Button
External I/O
1 x USB 2.0 host port; 1 x USB 3.0 host port; 1 x USB 3.0 Type-C (Data communication and DP Alt-Mode, Not a power source/sink); 1 x Debug serial console (UART); 1 x 40 pin GPIO and 1 x 14 pin GPIO
F — 1 x USB 3.0 Type C with Alt-mod DP — P
40 x GPIO Pins
G — 1 x USB 2.0 host — Q
14 x GPIO Pins
H — 1 x HDMI — R
1 x RTC backup battery holder
I — 1 x USB 3.0 host — S
1 x UART for System Console
iozone 1M random read
273.25 MB/s
iozone 1M random write
254.15 MB/s
iozone 4K random read
27.86 MB/s
iozone 4K random write
52.9 MB/s
J — 1x DC Power Jack — T
1 x M.2. M-KEY PCIe2.1 1 Lane
Memory
LPDDR5 8 or 16GiB with 64-bit bus width
Networking
1 x GbE port (RJ45, supports 10/100/1000 Mbps); – LED indicators; * Green LED: Flashing by data traffics at 100Mbps connection; * Amber LED: Flashing by data traffics at 1000Mbps connection
NPU
6 TOPS@INT8, Integrated AI accelerator RKNN NPU
Other features
* Power button; * Reset button; * System LED Indicators:; – Red (POWER) – Solid light when DC power is connected; – Blue (ALIVE) – Flashing like heartbeat while Kernel is running. Solid On in the u-boot stage.
Power
1 x DC jack: outer (negative) diameter 5.5mm inner (positive) diameter 2.1mm; DC input voltage range: 7.5V ~ 15.5V (12V/2A power adapter is recommended); – IDLE : ≃ 1W without any kind of peripherals; – CPU Stress : ≃ 7.5W (Performance governor) without any kind of peripherals; – Power Off : ≃ 0W
Processor
Rockchip RK3588S2 Processor; Quad-Core Cortex-A76 (2.3GHz +/- 0.1Ghz); Quad-Core Cortex-A55 (1.8GHz); ARMv8-A architecture with Neon and Crypto extensions; Mali-G610 GPU MP4 (1Ghz)64KB L1 instruction cache, 64KB L1 data cache, 512KB L2 cache, shared by Cortex-A76 processor; 32KB L1 instruction cache, 32KB L1 data cache, 128KB L2 cache, shared by Cortex-A55 processor; L3 data cache: 3MB, shared by 8 processors
Real-time clock
* On-board very low power PCF8536 RTC chip; * CR2032 RTC backup battery holder to keep time and date for near 10 years without main power input
Storage
1 x 64GB eMMC embedded (soldered to the PCB); 1 x Micro SD slot (UHS-I SDR104); * Boot priority between eMMC and microSD can be selected with the slide switch; 1 x NVME M.2 SSD (PCIe 2.1 x 1 lane)
U
1x Slide Switch (Boot mode select)
Video Output
1 x HDMI® 2.0 (up to 4K@60Hz with HDR, EDID); 1 x MIPI DSI Interface (30pin connector which is different from 31pin of the ODROID-M1); 1 x DP (via USB Type-C port)
Applications and use cases
Architectures in which G240813135632 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Charge-point controllers combine a metering and safety controller with a network link (Ethernet, Wi-Fi or cellular) toward a charge-point management system
To check
Outdoor temperature range and ingress protection
Metering accuracy requirements set by local regulation
Not every vision task justifies an industrial vision system. A Raspberry Pi with a camera module and an expansion board runs simple detection and counting models at low cost, close to the scene
To check
Frame rate and model size the board can run
Lighting and lens for the scene
Enclosure and cooling for the installation
Associated system blocks
ComputeCameras
Need a complete solution?
Send a request for G240813135632 and the other parts of your project.
Answers to the questions that the recorded characteristics of G240813135632 can answer. A question is not asked when nothing is recorded to answer it.
1Does it support CAN bus?
Yes — recorded under "Storage": 1 x 64GB eMMC embedded (soldered to the PCB); 1 x Micro SD slot (UHS-I SDR104); * Boot priority between eMMC and microSD can be selected with the slide switch; 1 x NVME M.2 SSD (PCIe 2.1 x 1 lane).
2Does it have an Ethernet port?
Yes — recorded under "D — 1 x Ethernet Transformer — N": 1 x Power Button.
3Does it have a USB interface?
Yes — recorded under "External I/O": 1 x USB 2.0 host port; 1 x USB 3.0 host port; 1 x USB 3.0 Type-C (Data communication and DP Alt-Mode, Not a power source/sink); 1 x Debug serial console (UART); 1 x 40 pin GPIO and 1 x 14 pin GPIO.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details