CA3603A
High-precision single-band multi-constellation aviation GNSS antenna

- Operating Temperature
- -40℃ to +85℃
- Operation Current
- 35mA(maximum)
- Storage Temperature
- -55℃ to +85℃
- Dimensions
- ¢ 90*36.3mm
High-precision single-band multi-constellation aviation GNSS antenna
Combination Multi-Band Antennas
The Harxon HX-CA3603A is a compact high-precision single-band GNSS aviation antenna for accurate positioning and satellite signal tracking in high-speed applications such as aircraft and unmanned surface vehicles.
Harxon HX-CA3603A GNSS antenna. The Harxon HX-CA3603A is a single-band multi-constellation GNSS aviation antenna, a combination multi-band antenna designed for accurate positioning and reliable satellite signal tracking.
RF performance. It receives GPS L1, GLONASS L1, Galileo E1 and BeiDou B1 signals, with RHCP polarization and a nominal impedance of 50 Ω. Maximum gain at zenith (90°) is 3 dBi in the 1164-1300 MHz band and 4 dBi in the 1525-1615 MHz band. Axial ratio is at most 3 dB, output VSWR at most 2.0 and noise figure at most 2 dB.
LNA and phase stability. The LNA offers a typical gain of 36 ± 2 dB and a group delay ripple below 5 ns. Its multi-point feeding design provides good phase center stability, supporting GNSS measurement accuracy.
Connectivity and power. SMA female connector, supply voltage from +3.3 V to +12 V DC, maximum operating current of 35 mA.
Mechanical and environmental. Dimensions 90 × 36.3 mm, weight at most 130 g, mounting with 4 M4 screws, IP67 water and dust resistance. Operating temperature from -40 °C to +85 °C, storage from -55 °C to +85 °C, humidity 95 % non-condensing.
Typical uses. Aircraft, fixed-wing drones, unmanned surface vehicles (USV) and hydrographic surveys, precision robotics.
Compliance. CE, FCC, RoHS, REACH.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for CA3603A, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | ¢ 90*36.3mm |
| Axial Ratio | ≤ 3dB |
| Connector | SMA female |
| Gain at Zenith(90°) | 1164-1300MHz 3dBi(maximum); 1525-1615MHz 4dBi (maximum) |
| Group Delay Ripple | <5ns |
| Humidity | 95% non-condensing |
| LNA Gain | 36±2dB(typical) |
| Mounting | 4 M4 screws installation |
| Noise Figure | ≤ 2dB |
| Nominal Impedance | 50&Omega |
| Operating Temperature | -40℃ to +85℃ |
| Operation Current | 35mA(maximum) |
| Operation Voltage | +3.3V to +12V DC |
| Output VSWR | ≤ 2.0 |
| Polarization | RHCP |
| Regulatory Compliance | CE, FCC, RoHS, REACH |
| Signal Received | GPS L1; Galileo E1; GLONASS L1; BDS B1 |
| Storage Temperature | -55℃ to +85℃ |
| Water/Dust Resistance | IP67 |
| Weight | ≤ 130g |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for CA3603A. For a missing document or a specific revision, our experts send it to you.
The Harxon HX-CA3603A is a compact high-precision single-band GNSS aviation antenna for accurate positioning and satellite signal tracking in high-speed applications such as aircraft and unmanned surface vehicles.
| Parameter | Value |
|---|---|
| Dimensions | ¢ 90*36.3mm |
| Axial Ratio | ≤ 3dB |
| Connector | SMA female |
| Gain at Zenith(90°) | 1164-1300MHz 3dBi(maximum); 1525-1615MHz 4dBi (maximum) |
| Group Delay Ripple | <5ns |
| Humidity | 95% non-condensing |
| LNA Gain | 36±2dB(typical) |
| Mounting | 4 M4 screws installation |
| Noise Figure | ≤ 2dB |
| Nominal Impedance | 50&Omega |
| Operating Temperature | -40℃ to +85℃ |
| Operation Current | 35mA(maximum) |
| Operation Voltage | +3.3V to +12V DC |
| Output VSWR | ≤ 2.0 |
| Polarization | RHCP |
| Regulatory Compliance | CE, FCC, RoHS, REACH |
| Signal Received | GPS L1; Galileo E1; GLONASS L1; BDS B1 |
| Storage Temperature | -55℃ to +85℃ |
| Water/Dust Resistance | IP67 |
| Weight | ≤ 130g |
Points to check before using CA3603A in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operation Current | 35mA(maximum) |
| Operation Voltage | +3.3V to +12V DC |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of CA3603A can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Signal Received": GPS L1; Galileo E1; GLONASS L1; BDS B1.
-40℃ to +85℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
High-precision single-band multi-constellation aviation GNSS antenna

Gnss antenna hx

Gnss antenna hx

Gnss antenna hx

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | CA3603A |
| Manufacturer | Harxon |
Combination Multi-Band Antennas
Dual-band L1/L5 multi-GNSS antenna for time synchronisation · Ref. : AU-500/AU-300
Price on request
Combination Multi-Band Antennas
Wide-band SDR kit with GPS antenna for BeagleBone
Price on request
Combination Multi-Band Antennas
Multi-band GNSS repeater antenna with RHCP polarization · Ref. : GNSS-ANTENNA-HX-CR8602A
Price on request
Combination Multi-Band Antennas
Multi-frequency quadrifilar RTK GNSS antenna · Ref. : BD-900
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details