HX-CE101A – Multi-band active ceramic GNSS antenna

Multi-band active ceramic GNSS antenna

Combination Multi-Band Antennas

  • -40℃ to +85℃
  • 13 mA Typ.
  • -55℃ to +85℃
  • φ 56*10.6mm
Manufacturer part number
CE101A
Manufacturer
Harxon
Operating Temperature
-40℃ to +85℃
Operation Current
13 mA Typ.

Harxon HX-CE101A active ceramic GNSS antenna for GPS L1, GLONASS L1, GALILEO E1 and BDS B1 positioning, intended for embedded systems and dynamic applications.

Product overview

Overview. The Harxon HX-CE101A is an OEM active ceramic GNSS antenna receiving GPS L1, GLONASS L1, GALILEO E1, BDS B1 and QZSS L1 signals with right-hand circular polarization (RHCP).

Main characteristics. Gain at zenith of 4.5 dB on a 100 mm ground plane, LNA gain of 28 ±2 dB, noise figure of 2 dB or less, axial ratio below 3 dB and nominal impedance of 50 Ω. The connector is an MCX-JW. The stacked patch design provides a stable phase center.

Integration. Compact 56 mm diameter by 10.6 mm height, weight of 50 g or less, mounted with four 2.3 mm screws. Operating current is 13 mA typical at a supply voltage of 3.3 to 12 VDC.

Environmental conditions. Operating temperature from -40 °C to +85 °C, storage temperature from -55 °C to +85 °C, humidity up to 95% non-condensing.

Typical uses. Passenger vehicles, UAVs and robots, where reception of low-elevation satellites and rejection of multipath signals are required.

See all specifications

Highlights

  • Axial Ratio: <3dB
  • Connector: MCX-JW
  • Humidity: 95% non-condensing
  • LNA Gain: 28±2dB
  • Nominal Impedance: 50&Omega
  • Operating Temperature: -40℃ to +85℃

Good to know before integrating

  • Thermal: rated operating range -40℃ to +85℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote