HX-CS3607A – Multi-constellation precision GNSS survey antenna

Multi-constellation precision GNSS survey antenna

Combination Multi-Band Antennas

  • -40℃ to +85℃
  • 35mA (maximum)
  • -55℃ to +85℃
  • ¢ 152*62.2mm
Manufacturer part number
CS3607A
Manufacturer
Harxon
Operating Temperature
-40℃ to +85℃
Operation Current
35mA (maximum)

Harxon HX-CS3607A precision GNSS survey antenna for rover and base stations and for mobile mapping, receiving L1 and E1 multi-constellation signals.

Product overview

Harxon HX-CS3607A is a high precision survey GNSS antenna, a multi-band GNSS antenna for rover and base stations. Reception — It receives GPS L1, GLONASS L1, GALILEO E1, BDS B1, QZSS L1 and SBAS L1 signals, with RHCP polarization and a zenith gain of 5.5 dBi maximum in the 1164-1300 MHz and 1520-1615 MHz bands. Its axial ratio is at most 3 dB. Phase center stability — The multi-point feeding design improves phase center stability, which the manufacturer states supports measurement accuracy. LNA performance — The low noise amplifier offers a typical gain of 40 dB and a noise figure of at most 2 dB, with a group delay ripple below 5 ns. According to the manufacturer, its out-of-band rejection suppresses electromagnetic interference. Interfaces and power — TNC female connector, 50 Ω nominal impedance and supply voltage from +3.3 to +12 VDC for a maximum current of 35 mA. Output VSWR is at most 2.0. Environment and mechanics — IP67 dust and water resistance, operating temperature from -40 °C to +85 °C, storage from -55 °C to +85 °C, 95% non-condensing humidity, BSW 5/8"-11 screw mounting and weight of at most 400 g for dimensions of 152 × 62.2 mm. CE compliance. Uses — Survey rover and base stations, agriculture and mobile mapping. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Connector: TNC female
  • Group Delay Ripple: <5ns
  • Humidity: 95% Non-condensing
  • LNA Gain: 40dB(typical)
  • Mounting: BSW5/8''-11 screw, 12-14mm
  • Nominal Impedance: 50&Omega

Good to know before integrating

  • Thermal: rated operating range -40℃ to +85℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote