TS100 – Multi-constellation GNSS antenna for RTK base station

Multi-constellation GNSS antenna for RTK base station

Antennas, RF Interconnect & Electromagnetic Components

  • -40℃ to +70℃
  • -55°C to +85°C
  • Single point 1.5m
  • CE, FCC, REACH, RoHS
Manufacturer part number
TS100
Manufacturer
Harxon
Operating Temperature
-40℃ to +70℃
Storage Temperature
-55°C to +85°C

The TS100 is a Harxon multi-constellation GNSS base station for RTK positioning and correction data output, designed for precision agriculture.

Product overview

Overview. The Harxon TS100 Base Series is a multi-constellation GNSS base station for RTK positioning. It tracks GPS, GLONASS, BeiDou and Galileo satellites simultaneously and delivers reliable correction data, including in challenging environments such as farmland surrounded by obstructions.

Main characteristics. The built-in antenna is a multi-frequency GNSS survey antenna with a multi-point feeding design that improves phase center stability and measurement accuracy. The high-precision GNSS module receives L1/L2/L5 for GPS, GLONASS L1/L2, BDS B1/B2/B3 and GALILEO E1/E5a/E5b signals, with multi-path resistance technology. Horizontal position accuracy in single-point mode is 1.5 m RMS, with a data rate of 10 Hz and a maximum correction data rate of 1 Hz. Cold-start time to first fix is under 50 s.

Interfaces and connectivity. The unit provides one RS-232 serial port for the user and a 10-pin female connector. Navigation output supports NMEA0183 and differential correction supports RTCM 2.x and 3.x. Status LEDs indicate power, RTK status and the correction data link.

Power and environment. The input voltage range is +9 VDC to +30 VDC with a power consumption below 8.5 W. The operating temperature range is -40 °C to +70 °C and the storage range is -55 °C to +85 °C. The ingress rating is IP67, the humidity tolerance is 95% non-condensing, and vibration compliance is stated against GJB150.16-2009 and MIL-STD-810. The weight is below 950 g for dimensions of 160 mm diameter by 80 mm height.

Mounting. The unit supports mounting by three magnets, by four M4 screw inserts, or by one 5/8-inch screw insert, for quick installation in challenging environments.

Typical uses. This base station provides RTK correction transmission for guidance of agricultural machinery and outdoor positioning surveys.

Compliance. The TS100 is compliant with CE, FCC, REACH and RoHS.

See all specifications

Highlights

  • Dimensions: 160 diameter x 80 height (mm)
  • COMMUNICATION PORTS: 1xRS-232 serial port for user
  • Compliance: CE, FCC, REACH, RoHS
  • Connector: 10pin female
  • Data Rate: 10Hz
  • Horizontal Position Accuracy (RMS): Single point 1.5m

Good to know before integrating

  • Thermal: rated operating range -40℃ to +70℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote