HX-TS122 – Multi-constellation smart GNSS antenna for precision agriculture

Multi-constellation smart GNSS antenna for precision agriculture

Antennas, RF Interconnect & Electromagnetic Components

  • -40℃ to +70℃
  • 10 Hz
  • -40°C to +75°C
  • φ 152xH57.7mm
Manufacturer part number
TS122
Manufacturer
Harxon
Operating Temperature
-40℃ to +70℃
Output Frequency
10 Hz

The Harxon HX-TS122 EUUB smart antenna is designed for guidance of precision agricultural machinery. It combines a single-frequency multi-system GNSS board with a high-precision GNSS antenna.

Product overview

Harxon HX-TS122 EUUB. the Harxon HX-TS122 EUUB smart antenna is a multi-constellation GNSS receiver designed for precision agriculture, integrating a single-frequency multi-system GNSS board with a high-precision GNSS antenna.

Accuracy and acquisition. the antenna receives GPS L1 C/A, GLONASS L1OF, BDS B1I, GALILEO E1 B/C and QZSS L1 C/A/S signals, with an accuracy of 1.5 m RMS in single point positioning and 30 cm RMS in PASS TO PASS mode. Time-to-first-fix from cold start is under 50 s, and the positioning output reaches 10 Hz.

Continuous positioning. Harxon's patented SLIDE technology maintains stable and continuous positioning during poor satellite signal tracking or short signal interruptions. Built-in terrain compensation corrects positioning deviations caused by vehicle roll and pitch on uneven ground or slopes.

Interfaces and connectivity. two RS-232 serial ports and Bluetooth wireless technology allow configuration through a smartphone or tablet, and wireless transmission of correction data from compatible external devices. The connector is an M12 8-pin type, and status LEDs indicate power and RTK status.

Power and environment. power is supplied from 9 to 36 VDC, with typical consumption of 2.5 W. The operating temperature range is -40 °C to +70 °C, and the storage range is -40 °C to +75 °C. The housing is rated IP67, humidity tolerance is 95% non-condensing, and the design complies with vibration standard GJB150.16-2009. Weight is under 500 g and diameter is 152 mm for a height of 57.7 mm.

Installation. three mounting options are available: 3 M5 screws, magnetic mount, or BSW5/8''-11 screw mount. A data cable is supplied with the unit.

Typical uses. guidance and automatic steering of tractors and agricultural machinery, particularly on uneven terrain, with connection to farm systems through the RS-232 ports and Bluetooth.

See all specifications

Highlights

  • Accessories: Data Cable*1pc (Alternative)
  • Connector: M12 8PIN Connector
  • Humidity: 95% non-condensing
  • Operating Temperature: -40℃ to +70℃
  • Output Frequency: 10 Hz
  • Standard Features: 10Hz Data Transfer Rate

Good to know before integrating

  • Thermal: rated operating range -40℃ to +70℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote