HT-VME213 – ESP32-S3 development board with 2.13 inch E-Ink display and LoRa

ESP32-S3 development board with 2.13 inch E-Ink display and LoRa

Microcontroller Development Boards

  • -20 ~ 70 ℃
  • 66.75*30.41*10mm
  • Bluetooth 5 (LE)
  • SX1262
Manufacturer part number
E213
Manufacturer
Heltec
Operating Temperature
-20 ~ 70 ℃
Frequency
470~510MHz,; 863~928MHz

Heltec HT-VME213 development board combining an ESP32-S3 microcontroller, an SX1262 LoRa radio and a 2.13 inch black and white E-Ink display, compatible with the Meshtastic firmware.

Product overview

Overview. The Heltec HT-VME213 (Vision Master E213) is a Heltec development board built around the ESP32-S3R8 microcontroller and the SX1262 LoRa chip, fitted with a 2.13 inch black and white E-Ink display. It can be operated via Bluetooth, Wi-Fi or LoRa and can run the Meshtastic firmware.

Main characteristics. 384 KB ROM, 512 KB SRAM, 16 KB RTC SRAM and 16 MB SiP flash memory, with 8 MB PSRAM. The LoRa radio covers the 433 MHz, 470~510 MHz, 863~870 MHz and 902~928 MHz bands, with a transmit power of 21±1 dBm and a maximum receiving sensitivity of -136 dBm at SF12 and BW 125 kHz.

Interfaces and connectivity. Bluetooth 5 (LE) and Wi-Fi 802.11 b/g/n up to 150 Mbps. The board provides a Type-C USB port, LoRa and Wi-Fi antenna connectors of IPEX1.0 type, two 2×18-pin 2.54 mm headers, two SH2.0-4P sensor interfaces, and 6 ADC_1 inputs, 1 ADC_2 input, 6 touch inputs, 3 UARTs, 2 I2C buses and 2 SPI buses.

Power and environment. Powered and charged from a 3.7 V lithium battery through a dedicated 1.25 mm two-pin connector (2 × 1.25 lithium battery interface). Operating temperature from -20 to 70 °C. Dimensions 66.75 × 30.41 × 10 mm, weight 35 g.

Typical uses. Development of LoRa communication nodes and Meshtastic gateways, prototyping of low-power E-Ink display interfaces, and connection of sensors through the SH2.0-4P interfaces and the I2C, SPI and UART buses.

Integration. Control is performed with the sample programs and development tools provided by the manufacturer.

See all specifications

Highlights

  • Dimensions: 66.75*30.41*10mm
  • Battery: 3.7V lithium battery power supply and charging
  • Bluetooth: Bluetooth 5 (LE)
  • Display: 2.13 Inch Black and White E-Ink Display Screen
  • Firmware: No, Meshtastic
  • LoRa Band: 433MHz, 470~510MHz, 863~870MHz, 902~928MHz, N/A

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -20 ~ 70 ℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote