MeshSolar – Solar and battery power management board with LoRa communication

Solar and battery power management board with LoRa communication

Microcontroller Development Boards

  • PH2.0-8P
  • PCIe M.2
  • MX1.25-8P
  • XT30 Female
Manufacturer part number
MESHSOLAR
Manufacturer
Heltec
Battery Cell Interface
PH2.0-8P
Interface
2*IPEX1.0(antenna), M.2

Heltec MeshSolar solar and battery power management module combining a 1 to 4 cell BMS with a BLE and LoRa communication board for low-power outdoor devices.

Product overview

Overview. The Heltec MeshSolar is a solar and battery power management board for low-power outdoor devices. It combines a BMS Power Management board and a BLE + LoRa communication board, with solar MPPT charging, USB PD3.0 fast charging and 18~24V DC input.

Battery management. The board manages 1 to 4 cells and supports lithium-ion, lithium polymer and lithium iron phosphate batteries. It provides balanced charging and protection against overcharge (4.3V), undervoltage (2.5V) and overcurrent (2A). The battery charging current is up to 1.5A and the balancing is 4.2V, 100mA.

Communication. The HT-n5262M module (nRF52840 + SX1262) provides the communication. The MCU is an nRF52840 with 1M ROM and 256KB SRAM, supporting Bluetooth 5, Bluetooth mesh and BLE. The SX1262 LoRa chip covers the 863~870MHz and 902~928MHz bands. The product is compatible with the Meshtastic ecosystem.

Interfaces. The board offers 3*SPI, 2*I2C, 2*UART, 4*PWM, QSPI, I2S, PDM and QDEC, an M.2 interface for the MCU, two IPEX1.0 antenna connectors, a USB Type C expansion port, MX1.25-9P screen and MX1.25-8P GNSS connectors, and an XT30 female connector for solar panel and battery.

Power and environment. The internal power supply is 3.3V. The operating range is -40 to 85℃ at 90% humidity, non-condensing. Dimensions are 43*97*11mm and weight is 35 g.

Typical uses. The product suits environmental monitoring systems, smart agriculture and livestock farming, asset management and tracking, and outdoor emergency equipment.

See all specifications

Highlights

  • Dimensions: 43*97*11mm
  • Balancing: 4.2V, 100mA
  • Battery Cell Interface: PH2.0-8P
  • Battery charging current: ≤1.5A
  • Battery Type: Lithium-ion, Lithium iron phosphate
  • Battery Type Supported: Lithium-ion, lithium polymer, Lithium iron phosphate

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote