The Heltec RD-GA01 is an expansion board of the RadioCore series, compatible with the LoRa versions of RC32 and RC52, integrating a TFT display, GNSS and a 1800 mAh lithium battery.
Dimensions60×53×30mm
AntennaSpecification
Battery104040 1800mAh Li-ion
Compatible MCURC32, RC52
Display1.08 inch TFT
Enclosure MaterialPLA(3D-printed)
Product overview
Overview. The Heltec RD-GA01 is an expansion board for the Heltec RadioCore series, compatible with the RC32-62 and RC52-62 modules. It integrates a 1.08 inch TFT display, a 9-axis IMU, a GNSS module, a buzzer and several buttons.
Main characteristics. Dimensions are 60×53×30 mm and weight is 55 g. The enclosure is made of 3D-printed PLA. An onboard 104040 lithium-ion battery of 1800 mAh is fitted.
Radio and GNSS. The LoRa part covers the 433 MHz, 863~870 MHz and 902~928 MHz bands, with a Tx power of 21±1 dBm and 28±1 dBm. The positioning module is a Quectel L76K on L1. An antenna is listed in the specifications.
Typical uses. This board suits development of LoRa mesh nodes and onboard positioning, with Meshtastic and MeshCore firmware compatibility mentioned in the manufacturer data for the RC32 and RC52 modules.
Implementation. The manufacturer notes that GNSS reception requires an outdoor location with open sky, and that firmware flashing differs by main board (bootloader mode for RC32, DFU mode for RC52). Available on quotation from Atlas Electronics.
The Heltec RD-GA01 is an expansion board of the RadioCore series, compatible with the LoRa versions of RC32 and RC52, integrating a TFT display, GNSS and a 1800 mAh lithium battery.
Dimensions60×53×30mm
AntennaSpecification
Battery104040 1800mAh Li-ion
Compatible MCURC32, RC52
Display1.08 inch TFT
2. Datasheet extract (recorded values)
Parameter
Value
Dimensions
60×53×30mm
Antenna
Specification
Battery
104040 1800mAh Li-ion
Compatible MCU
RC32, RC52
Display
1.08 inch TFT
Enclosure Material
PLA(3D-printed)
GNSS Module
Quectel L76K (L1)
LoRa Band
433MHz, 863~870MHz, 902~928MHz
RadioCore
RC32-62, RC52-62
Tx Power
21±1 dBm, 28±1 dBm
Weight
55 g
Applications and use cases
Architectures in which RD-GA01 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Seeed SenseCAP sensors connect to Seeed’s SenseCAP cloud platform and app, and Seeed edge computers, camera modules, Grove and XIAO boards complete the chain for custom devices and local processing
To check
SenseCAP cloud platform and app, or the customer’s own network server
Prototype on Grove and XIAO, then move to industrial versions
Local processing on the edge computers or in the cloud
Associated system blocks
SensorsEdge computingDevelopment boards
Need a complete solution?
Send a request for RD-GA01 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details