Heltec T114 low-power development board combining LoRa and Bluetooth 5 with Bluetooth mesh, for Meshtastic and LoRaWAN mesh networks.
Operating Temperature-20 ~ 70 ℃
Frequency470~510MHz; 863~870MHz; 902~928MHZ.
Memory1M ROM 256KB SRAM
Dimensions50.80*22.86mm
Battery3~4.2V battery power supply and charge.
Displayonboard 1.14 inch TFT-LCD display
Product overview
Overview. The Heltec Mesh Node T114 (Rev. 2.0) is a low-power LoRa development board based on the nRF52840 microcontroller and the SX1262 LoRa transceiver, compatible with Meshtastic and LoRaWAN.
Main characteristics. The board covers the 433MHz, 470~510MHz, 863~870MHz and 902~928MHz bands, with 21±1dBm Tx power and a maximum receiving sensitivity of -135dBm at SF12 BW=125KHz. It provides 1M ROM and 256KB SRAM, and an onboard 1.14 inch TFT-LCD display.
Interfaces and connectivity. It includes Bluetooth LE 5 with Bluetooth mesh, a Type-C USB 2.0 port, 4 SPI, 2 TWI, 2 UART, 4 PWM, QPSI, I2S, PDM and QDEC. The LoRa antenna connects through an IPEX1.0 connector, and an 8*1.25 connector accepts an optional GPS module. Two 13*2.54 headers are provided.
Power and environment. The board accepts a 3~4.2V lithium battery with charging, as well as a solar panel through a dedicated connector. Consumption is about 11uA in deep sleep, about 22uA in tracker mode sleep and about 51mA with GPS and TFT on. It operates from -20 to 70 ℃ and weighs 35 g for dimensions of 50.80*22.86mm.
Typical uses. With its low-power modes and optional GPS, the board suits the creation of LoRa mesh network nodes and position tracking in tracker mode.
Heltec T114 low-power development board combining LoRa and Bluetooth 5 with Bluetooth mesh, for Meshtastic and LoRaWAN mesh networks.
Operating Temperature-20 ~ 70 ℃
Frequency470~510MHz; 863~870MHz; 902~928MHZ.
Memory1M ROM 256KB SRAM
Dimensions50.80*22.86mm
Battery3~4.2V battery power supply and charge.
2. Datasheet extract (recorded values)
Parameter
Value
Dimensions
50.80*22.86mm
Battery
3~4.2V battery power supply and charge.
Bluetooth
Bluetooth LE: Bluetooth 5, Bluetooth mesh
Display
onboard 1.14 inch TFT-LCD display
Electrical Characteristics
Deep Sleep: ~11uA; Tracker mode sleep: ~22uA; GPS OFF, TFT OFF: ~9mA; GPS OFF, TFT ON: ~20mA; GPS ON, TFT ON: ~51mA
Frequency
470~510MHz; 863~870MHz; 902~928MHZ.
Hardware Resource
USB 2.0, 4 * SPI, 2 * TWI, 2 * UART, 4 * PWM, QPSI, 12S, PDM, QDEC Etc.
Interface
Type-C USB 2*1.25 lithium battery connector 2*1.25 solar panel connector LoRa ANT (IPEX1.0) 8*1.25 GPS module connector 2*13*2.54 Header Pin
LoRa Band
433MHz, 470~510MHz, 863~870MHz, 902~928MHz
LoRa Node Chip
SX1262
Max. Receiving Sensitivity
-135dBm@SF12 BW=125KHz
Max Tx Power
21±1dBm
MCU
nRF52840
Memory
1M ROM 256KB SRAM
Need Display?
Yes, No
Need GPS?
Yes, No
Need Shell?
Yes, No
Operating Temperature
-20 ~ 70 ℃
Weight
35 g
Integration
Points to check before using T114 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
1Thermalrated operating range -20 ~ 70 ℃ — check it against the installation environment.
Power and communication
Battery
3~4.2V battery power supply and charge.
Max Tx Power
21±1dBm
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Implementation checklist
Thermal : rated operating range -20 ~ 70 ℃ — check it against the installation environment.
Applications and use cases
Architectures in which T114 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Seeed SenseCAP sensors connect to Seeed’s SenseCAP cloud platform and app, and Seeed edge computers, camera modules, Grove and XIAO boards complete the chain for custom devices and local processing
To check
SenseCAP cloud platform and app, or the customer’s own network server
Prototype on Grove and XIAO, then move to industrial versions
Local processing on the edge computers or in the cloud
Associated system blocks
SensorsEdge computingDevelopment boards
Need a complete solution?
Send a request for T114 and the other parts of your project.
Answers to the questions that the recorded characteristics of T114 can answer. A question is not asked when nothing is recorded to answer it.
1Does it support SPI?
Yes — recorded under "Hardware Resource": USB 2.0, 4 * SPI, 2 * TWI, 2 * UART, 4 * PWM, QPSI, 12S, PDM, QDEC Etc..
2Does it include Bluetooth?
Yes — recorded under "Bluetooth": Bluetooth LE: Bluetooth 5, Bluetooth mesh.
3Does it include GNSS/GPS?
Yes — recorded under "Electrical Characteristics": Deep Sleep: ~11uA; Tracker mode sleep: ~22uA; GPS OFF, TFT OFF: ~9mA; GPS OFF, TFT ON: ~20mA; GPS ON, TFT ON: ~51mA.
4Does it have a USB interface?
Yes — recorded under "Hardware Resource": USB 2.0, 4 * SPI, 2 * TWI, 2 * UART, 4 * PWM, QPSI, 12S, PDM, QDEC Etc..
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productHeltec
T114
nRF52840 LoRa SX1262 Development Board with GPS and TFT Display
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details