V4.3 – ESP32-S3 LoRa Development Board with SX1262 Transceiver

ESP32-S3 LoRa Development Board with SX1262 Transceiver

Microcontroller Development Boards

  • LoRaWAN
  • Wi-Fi
Manufacturer part number
V4.3
Manufacturer
Heltec

The Heltec WiFi LoRa 32 V4.3 development board pairs an ESP32-S3 microcontroller with an SX1262 LoRa transceiver for long-range wireless communication projects.

Product overview

Overview. The Heltec WiFi LoRa 32 V4.3 is a Heltec development board built around the ESP32-S3R2 microcontroller and the SX1262 LoRa chip. It is compatible with Meshtastic and MeshCore firmware, as well as LoRaWAN.

Main characteristics. 16 MB external Flash and 2 MB PSRAM, dimensions 51.7 × 25.4 × 10.7 mm, weight 35 g. No display on this version. Operating temperature from -20 to 70 °C.

Radio. LoRa bands of 863 to 870 MHz and 902 to 928 MHz for the high-power version, with a LoRa transmit power of 28 dBm. Low-power version available, with 22 dBm and a band of 433 to 510 MHz. LoRa and 2.4 GHz antennas on IPEX 1.0 connectors. Wi-Fi 802.11 b/g/n up to 150 Mbps and Bluetooth 5 (LE) with Bluetooth Mesh.

Interfaces and connectivity. USB Type-C port, 1.25 mm connectors for lithium battery and solar panel, 1.25 mm 8-pin connector for GNSS module, 3 UART, 2 I2C and 2 SPI, 7 ADC1 and 2 ADC2 inputs, 7 touch inputs.

Power. Lithium battery from 3.3 to 4.4 V, solar input from 4.7 to 6 V, consumption below 20 µA according to the manufacturer.

Typical uses. Development of LoRa nodes for Meshtastic or MeshCore mesh networks, and LoRaWAN connected sensors, with additional free pins for sensor integration.

Integration. Form factor and pinout compatible with the WiFi LoRa 32 V3. The firmware must be chosen according to the board version, and the board must enter bootloader mode before flashing.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote