Product overview
Hexing distributed DTU HXD320-DCU and HXD320-CMU: distribution automation terminal for 10 kV substations — The Hexing distributed distribution terminal unit is a core piece of equipment in distribution automation. Its decentralized architecture combines bay units, installed within switchgear cubicles, and a common management unit, which communicate over a communication bus. It is mainly deployed in ring main units, switching stations and distribution rooms of 10 kV networks.
Metering and protection. The bay units measure the three-phase ABC voltages of one bus section and the zero-sequence voltage, as well as the three-phase ABC currents and the zero-sequence current per bay. They provide three-stage overcurrent protection, two-stage zero-sequence current protection, short-circuit fault alarm, small current grounding line selection, three-shot auto-reclosing, non-interrupting current blocking, under-voltage alarm, zero-sequence overvoltage alarm, PT disconnection alarm and post-acceleration protection. Built-in line loss metering is included.
Inputs, outputs and control. Each bay has 7 digital inputs and two remote control outputs (open/close) and two protection outputs (open/close). The opening and closing circuits feature an anti-misoperation design.
Connectivity. The terminal includes 1 Bluetooth interface, 1 hot-swappable 4G/5G module interface, 1 hot-swappable wireless communication module interface, 3 RS485 communication interfaces, 1 serial debug interface and 2 100M Ethernet interfaces. Time synchronization is provided by GPS/Beidou.
Power and installation. The device is powered by DC48V and the communication by DC24V. The rectangular aviation connector has 26 pins. It is installed as a shielded vertical unit in a cabinet no larger than 1300*600*400mm, excluding the communication box.
Integration. The RS485 and Ethernet interfaces allow all collected information to be uploaded to the master station system.