Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

HXE12-ES – Single-phase static energy meter for residential use

Single-phase static energy meter for residential use

Single-Phase Energy Meters

Manufacturer part number
HXE12
Manufacturer
Hexing

Hexing single-phase static energy meter for residential installations, direct-connected, class 1 with 5 A base current, for active energy measurement.

Product overview

Overview. The Hexing HXE12-ES is a next-generation static energy meter for residential single-phase use, combining essential functions with a cost-effective design.

Main characteristics. The meter is class 1 for active energy, with a base current of 5 A, a maximum current of 60 A, a rated voltage of 220 V and an operating voltage range of 90%-110% Un. It is designed for direct connection, with a starting current of ≤0.4% Ib for active energy and a frequency of 60 Hz ± 2%.

Standards and electrical withstand. The meter complies with IEC62052-11 and IEC62053-21. It withstands a dielectric strength test of 4 kV for 1 min, an impulse voltage test of 1.2/50 µs at 6 kV, an electrical fast transient/burst test of 4 kV and a surge immunity of 5 kV.

Electromagnetic compatibility. It withstands an air electrostatic discharge of 15 kV, a contact electrostatic discharge of 8 kV, and a radiated RF electromagnetic field of 10 V/m (with load) from 80 MHz to 2000 MHz.

Enclosure and environment. The enclosure is rated IP54, with a Cold Gray PC base and a transparent PC cover. It operates between -40 ℃ and 70 ℃, stores and transports between -40 ℃ and 70 ℃, and tolerates humidity up to 95% relative humidity, non-condensing. Its dimensions with extended cover are 51.1 mm x 113 mm x 109 mm (H x L x W), and its net weight is approximately 0.33 kg.

Typical uses. It suits energy metering in direct-connected residential single-phase installations, with voltage circuit power below 1.2 W and current circuit below 4 VA.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote