Overview. The Holykell H5100 is a single-loop digital display instrument, made by Holykell, designed to display values measured by a pressure, level, temperature or flow sensor. Its LED dual screen shows the measurement data at the same time.
Main characteristics. Accuracy of 0.2%FS ±1 bit. Display range from -1999 to 9999, with a 0 to 100% measured value bargraph and an LBD light showing the working state. Standard snap-on frame. Setting by panel touch keys, with locking of parameter setting values and permanent storage of the settings.
Interfaces and connectivity. Standard MODBUS communication protocol, over RS-485 with a communication distance of up to 1 km, and over RS-232 with a distance of up to 15 meters. For communication, the communication converter must be an active one.
Inputs, outputs and power. Current, voltage, resistance and thermocouple inputs. Current and voltage outputs. Input impedance: 500 kΩ or more for currents up to 250 Ω, and 250 kΩ or more for output loads up to 500 Ω; for higher load capacity, the module must be replaced. Maximum input current of 30 mA and maximum input voltage of 6 V. Power supply AC 100 to 240 V (50/60 Hz) or DC 20 to 29 V. Power consumption of 5 W or less.
Working environment. Ambient temperature 0 to 50 °C, relative humidity 85% RH or less. Keep away from strongly corrosive gases.
Typical uses. Thanks to its RS-485 MODBUS output, the display can be connected to a PLC or a supervision system for remote monitoring. It is used with pressure and level sensors, notably in diesel generators and refineries, according to the manufacturer.
Integration. Compatible with Holykell pressure and level sensors, and can be combined with wireless sensors for a remote monitoring solution. Available on quotation from Atlas Electronics.