CNV-SNAP-AN0 – SNAP 2.4 GHz wireless network interface module for LED drivers

SNAP 2.4 GHz wireless network interface module for LED drivers

LED Power Supplies

Manufacturer part number
SNAP-AN0
Manufacturer
Inventronics

Inventronics CNV-SNAP-AN0 wireless network interface module that lets one or more Controls-Ready LED drivers be controlled by Synapse SNAP mesh networks.

Product overview

Overview. The Inventronics CNV-SNAP-AN0 is a wireless network interface module that enables one or more Inventronics Controls-Ready LED drivers to be controlled by Synapse SNAP mesh networks. Its compact design and flexible deployment options make it suitable for indoor and outdoor lighting systems and a wide range of luminaires.

Main characteristics. The module operates on the SNAP 2.4 GHz radio, 802.15.4, with a range of approximately 400 feet. It is powered by the Inventronics always-on 12 V auxiliary supply, which eliminates the need for external power packs. It uses the Inventronics Dim-to-Off capability, eliminating the need for an AC switch or relay. It utilises the Synapse DIM10-087-06 module. Configuration is carried out through a mobile-friendly Wi-Fi or LAN-accessible interface.

Power and environment. The module is powered by the 12 V auxiliary output of the LED driver. It is rated IP66 and UL dry, damp and wet location. It is suitable for applications exposed to direct sunlight. Dimensions are 92 x 69 x 29 mm (3.62 x 2.71 x 1.14 inches). Its flame class is 5VA.

Standards and certifications. The product complies with CE standards EN 61347-2-11, EN 61347-1, EN 62479, ETSI EN 300 220-1 V2.4.1, ETSI EN 300 220-2 V2.4.1, ETSI EN 301 489-1 V1.9.2 and ETSI EN 301 489-3 V1.6.1. It meets EMC requirements EN 55022(1) for conducted and radiated emission, EN 61000-4-2 for electrostatic discharge (8 kV air, 4 kV contact) and EN 61000-4-3 for radio-frequency electromagnetic field susceptibility. It complies with FCC Part 15, Class B per ANSI C63.4, and is UL/cUL listed to UL8750 and CAN/CSA-C22.2 No. 250.13.

Typical uses. The module allows a set of luminaires fitted with Inventronics Controls-Ready LED drivers to be grouped into a SNAP mesh network, whether installed outside a junction box or directly on the luminaire.

Integration. The CNV-SNAP-AN0 connects to Inventronics Controls-Ready LED drivers and is configured without dedicated software, from a browser reachable over Wi-Fi or the local network.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All LED Power Supplies
Request a quote