Product overview
Overview. The KinCony E16v3 is a RS485 Modbus DIN rail relay module with 16 controllable relay outputs. It is based on an ARM CPU and has 16 manual control buttons that can operate the relays even when the system is broken.
Main characteristics. Each channel uses an OMRON G2R-1-E SPDT relay with COM, NO and NC contacts, rated at a maximum of 16 A at 250 VAC. The coil voltage is DC 12 V or 24 V. Mechanical life exceeds 5 million cycles and electrical life exceeds 100,000 cycles at 20 cycles per minute under rated control capacity. The module measures 284 mm × 105 mm × 73 mm.
Interfaces and connectivity. The module is commanded over RS485 using the standard MODBUS protocol, with a default baud rate of 38400 bps. A 4-bit DIP switch sets the RS485 address on bits 1 to 3, and bit 4 enables or disables RS485 communication. The manual control button interface can be extended with user-supplied switches at up to 500 metres. Three control modes are available: HIGH (12 V or 24 V) or LOW (0 V) level, on-board or extended manual buttons, and RS485 Modbus commands.
Power and environment. Relay consumption is 0.53 W per relay. The operating temperature range is -40 to 55 ℃.
Integration. The module can be integrated into Home Assistant through ESPHome using the RS485 Modbus controller.