Product overview
Overview. The KinCony E24v3 is a 24-channel relay control module on DIN rail, based on an ARM CPU, for switching loads up to 16A at 250VAC. Each channel provides COM, NO and NC contacts, and the relays are removable.
Main characteristics. The integrated relays are OMRON G2R-1-E SPDT. The coil voltage is 12V or 24V. The module measures 412mm x 105mm x 73mm and each relay consumes 0.53W. It has 24 manual control buttons on the board, which can be extended by the user with a cable of up to 500 meters.
Interfaces and connectivity. The module is controlled over RS485 using the standard Modbus protocol, with a default baud rate of 38400bps. A 4-bit DIP switch sets the RS485 address on bits 1 to 3 and disables communication on bit 4. It can also be driven by a HIGH (12V or 24V) or LOW (0V) level, or by the manual buttons, which work without software or network.
Power and environment. The operating temperature range is -40 to 55°C. The mechanical life is more than 5 million operations and the electrical life more than 100,000 operations under rated load, at a maximum of 20 operations per minute.
Typical uses and integration. Thanks to the RS485 Modbus protocol, the module can be connected to a PLC or Modbus controller to switch loads remotely. The manufacturer states that it can be integrated into Home Assistant via ESPHome using an RS485 Modbus controller.