CE07 – Flat rectangular proximity sensor 30x50x7 mm, 10-30 VDC

Flat rectangular proximity sensor 30x50x7 mm, 10-30 VDC

General Industrial Sensors & Transmitters

  • 10 … 30 VDC
  • ≤ 15mA
  • ≤ 200mA
  • 50 Hz
Manufacturer part number
CE07
Manufacturer
Lanbao
Supply voltage
10 … 30 VDC
Current consumption
≤ 15mA

The Lanbao CE07 inductive sensor detects metal targets without contact, with a 5 mm rated distance and an IP67 PBT housing for industrial automation.

Product overview

Overview. The Lanbao CE07 inductive sensor is a proximity detector for contactless detection of metal targets. It is offered in flush or non-flush mounting and operates from a 10 to 30 VDC supply.

Main characteristics. The rated distance Sn is 5 mm (adjustable) or 8 mm (adjustable), with an assured distance Sa of 0 to 4 mm or 0 to 6.4 mm. The switching frequency is 50 Hz, the hysteresis ranges from 3 to 20 %, and the repeated error is less than or equal to 3 %. The standard target is Fe15*15*1t or Fe24*24*1t.

Outputs and connection. The CE07 is available in NPN or PNP versions, with NO or NC output depending on the part number (CE07SF05DNC for NPN, CE07SF05DPO for PNP). The load current is less than or equal to 200 mA, the residual voltage less than or equal to 2.5 V, and the consumption less than or equal to 15 mA. A yellow LED indicates the output state, and reverse polarity protection is built in. Connection is made by a 2 m PVC cable.

Power and environment. The PBT housing has an IP67 protection degree. The ambient temperature range is -25 °C to 70 °C, and the ambient humidity 35 to 95 %RH. Vibration resistance is 10 to 50 Hz (1.5 mm), impulse resistance 1000 V AC at 50/60 Hz for 60 s, and insulation resistance at least 50 MΩ (500 VDC). Dimensions are 30 x 50 x 7 mm.

Typical uses. This sensor suits position or presence detection of metal parts on assembly lines, conveyors or machine tools, connected directly to a PLC or a digital input.

See all specifications

Highlights

  • Dimensions: 30*50*7mm
  • Ambient Humidity: 35...95%RH
  • Connection: 2m PVC cable
  • Housing Material: PBT
  • Impulse resistance: 1000V/AC 50/60Hz 60s
  • Mounting: Flush/Non-flush

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 10 … 30 VDC.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote