Product overview
Overview. The Lanbao FD1 is a digital amplifier from the FD series, designed for object detection with optical sensors in industrial installations. It is a control module with button-adjusted detection distance and self-learning setup.
Main characteristics. The detection distance is set with a button, using self-learning. The output is adjustable: no delay, or a 100 ms turn-off delay. NO/NC selection is available through an optional dip switch. Hysteresis is between 3% and 20%, repeat accuracy is 5% and response time is below 1 ms.
Power and environment. The power supply is DC 10-30V, with voltage fluctuation below 10%. Consumption is below 40 mA, rated load current is 100 mA and voltage drop is below 2.5 V. The ambient temperature range is 0℃ to 50℃ and the protection degree is IP54. The housing is PC+ABS and the connection is a 2 m PVC cable.
Protection and robustness. The module is protected against short circuit and overload. It withstands shock (half sine pulse, peak speed 30gn, pulse duration 11 ms) and vibration (amplitude 1 mm, frequency 10 to 55 Hz).
Typical uses. This module suits object detection on production and conveyor lines, in combination with the optical fibres of the Lanbao range. The NPN and PNP outputs simplify connection to programmable logic controllers and input modules.