Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

FD3-NB11R – NPN fiber optic digital amplifier

NPN fiber optic digital amplifier

General Industrial Sensors & Transmitters

  • Fiber optic and SFP
Manufacturer part number
FD3
Manufacturer
Lanbao

Lanbao FD3-NB11R digital fiber optic amplifier with NPN output, selectable timer functions and adjustable sensitivity for industrial sensing.

Product overview

Overview. The Lanbao FD3-NB11R is a digital fiber optic amplifier with NPN output for industrial sensing. It belongs to the FD3 series from Shanghai Lanbao Sensor Technology.

Main characteristics. Sensitivity is adjusted through simple operation and supports automatic calibration. Response time is 50 µs in HIGH SPEED mode, 250 µs in FINE mode, 1 ms in SUPER mode and 16 ms in MEGA mode. Delay functions include on-delay timer, off-delay timer and single timer. Output is NO/NC optional, with a red LED light source.

Output and protection. The NPN 0 V control output carries a load current of up to 100 mA, with a residual voltage of 1 V or less. The circuit is protected against short circuit, overload and reverse polarity.

Power and environment. Supply voltage is 12 to 24 VDC ±10 % with ripple (P-P) of 10 % or less. Power consumption is 900 mW or less in normal mode and 800 mW or less in power save mode. Ambient temperature range is -20 to 55 ℃ (no freezing), and humidity 35 to 85 %RH (no condensation). The housing is PC, the connection is a 2 m PVC cable, and the weight is about 66 g.

Mechanical resistance. It withstands impulse of 500 m/s² in X, Y and Z directions and vibration of 10 to 55 Hz with dual amplitude of 1.5 mm.

Integration. Available on quotation from Atlas Electronics.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote