Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

FN08-E1 – Hall magnetic M8 cylindrical proximity sensor, IP67

Hall magnetic M8 cylindrical proximity sensor, IP67

General Industrial Sensors & Transmitters

Manufacturer part number
FN08-E1
Manufacturer
Lanbao

The Lanbao FN08-E1 is a flush-mount M8 magnetic Hall proximity sensor with DC 3-wire connection. It detects objects at 8 mm and suits industrial automation applications.

Product overview

Overview. The Lanbao FN08-E1 is an M8 cylindrical Hall sensor with DC 3-wire connection, from the manufacturer's Hall series, available with NPN output (FN08DNC-E1) or PNP output (FN08DPO-E1).

Main characteristics. 8 mm detection distance, flush installation, 200 Hz switching frequency, hysteresis of 3 to 20%, repetitive error of 3% or less, switch point offset of ±10% or less, and residual voltage of 2.5 VDC or less. Load current is limited to 50 mA and consumption to 15 mA maximum. A yellow LED indicates the switching state.

Power and environment. Supply voltage of 10 to 30 VDC. Ambient temperature range of -25 to 70 °C, minimum operating temperature of -20 °C, environmental humidity of 35 to 95 % RH. IP67 protection rating. Insulation resistance of 50 MΩ or more (500 VDC) and withstand voltage of 1000 VAC, 50/60 Hz for 60 s. Vibration resistant, complex amplitude of 1.5 mm between 10 and 50 Hz.

Connection and construction. M8 connector, stainless steel or nickel-copper alloy housing, dimensions M8 x 1 x 40. Surge and short-circuit protection.

Typical uses. Position and presence detection of metallic or magnetic parts on machines and automation lines, compatible with NPN or PNP PLC inputs depending on the version selected.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote