Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

LE10SF05DPO – Inductive proximity sensor, shielded M10 PNP 5 mm

Inductive proximity sensor, shielded M10 PNP 5 mm

General Industrial Sensors & Transmitters

Manufacturer part number
LE10
Manufacturer
Lanbao

Lanbao LE10SF05DPO inductive proximity sensor with PNP output and 5 mm rated distance, for detecting metal parts in industrial environments.

Product overview

Lanbao LE10SF05DPO. PNP inductive proximity sensor from the LE10 standard function series.

Main characteristics. Rated sensing distance (Sn) of 5 mm, assured distance (Sa) of 0 to 4 mm, switching frequency of 1000 Hz, repeat accuracy ≤ 3 % and switch-point drift ≤ ± 10 %. Standard target Fe 18*18*1t or Fe 24*24*1t. Output NO/NC depending on the part number, with a yellow output indicator LED.

Interfaces and connectivity. 2 m PVC cable connection, PNP output. Load current ≤ 100 mA, residual voltage ≤ 2.5 V.

Power and environment. Supply voltage 10 to 30 VDC, consumption ≤ 10 mA. Protection against short-circuit, overload and reverse polarity. PBT housing, degree of protection IP67, ambient temperature -25 ℃ to 70 ℃, ambient humidity 35 to 95 %RH, insulation resistance ≥ 50 MΩ (500 VDC), voltage withstand 1000 V AC 50/60 Hz for 60 s, vibration resistance 10 to 50 Hz (1.5 mm). Dimensions 10*18*30 mm, flush or non-flush mounting.

Typical uses. Presence or position detection of metal parts on conveyors and machines, and connection to a programmable logic controller through its PNP input.

Integration. Available on quotation from Atlas Electronics.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote