LE40SZ-E2 – Low temperature resistant M12 inductive proximity sensor

Low temperature resistant M12 inductive proximity sensor

General Industrial Sensors & Transmitters

  • 10...30 VDC
  • ≤ 15mA
  • ≤ 200mA
  • 300 Hz/200 Hz
Manufacturer part number
LE40SZ-E2
Manufacturer
Lanbao
Supply voltage
10...30 VDC
Current consumption
≤ 15mA

The Lanbao LE40SZ-E2 is a non-contact inductive proximity sensor for metal targets. It operates from -40 °C to 70 °C and suits industrial applications exposed to cold.

Product overview

Overview. The Lanbao LE40SZ-E2 is an inductive proximity sensor from the low temperature resistant series, designed for non-contact detection of metal targets in industrial environments.

Main characteristics. Rated sensing distance of 15 mm or 20 mm depending on version, flush or non-flush mounting, switching frequency of 300 Hz or 200 Hz, repeat accuracy at most 3 %, switch-point drift at most ±10 %. Dimensions 40 × 40 × 66 mm, PBT housing.

Interfaces and connectivity. M12 connector, NPN or PNP output depending on the part number (LE40SZSF15DNCW1-E2 for NPN, LE40SZSF15DPOW1-E2 for PNP), NO or NC output depending on the part number, yellow LED output indicator. Load current at most 200 mA, residual voltage at most 2.5 V.

Power and environment. Supply voltage 10 to 30 VDC, current consumption at most 15 mA. Protected against short-circuit, overload and reverse polarity. IP67 degree of protection, ambient temperature -40 °C to 70 °C, ambient humidity 35 to 95 %RH, vibration resistance 10 to 50 Hz (1.5 mm), voltage withstand 1000 V AC for 60 s.

Integration. Standard targets Fe 45 × 45 × 1 mm or Fe 60 × 60 × 1 mm for verifying sensing distances. The sensor integrates into automation systems with inputs compatible with direct-switching NPN or PNP outputs.

See all specifications

Highlights

  • Dimensions: 40*40*66mm
  • Supply voltage: 10...30 VDC
  • Ambient temperature: -40°C...70°C
  • Assured distance [Sa]: 0...12mm/0...16mm
  • Circuit protection: Short-circuit, overload and reverse polarity
  • Connection Type: M12 connector

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 10...30 VDC.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote