Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

LT18 – 2-channel NO+NO clamp inductive sensor, IP67, PNP output

2-channel NO+NO clamp inductive sensor, IP67, PNP output

General Industrial Sensors & Transmitters

Manufacturer part number
LT18
Manufacturer
Lanbao

LT18 inductive clamp sensor with two PNP normally open outputs, 2 mm rated distance and IP67 protection, for non-contact detection of ferrous targets.

Product overview

Overview. The Lanbao LT18 inductive clamp sensor is a two-channel normally open (NO+NO) proximity sensor, reference LT18, supplied in the PNP version LT18SN02DPOA-E2 1001. It is designed for non-contact detection of metal targets, with a rated distance of 2 mm per channel and a standard target of Fe5*5*1t.

Main characteristics. Non-flush installation, hysteresis of 3 to 15%, repetitive error of 3% or less, switch point offset of +10% Sr or less, temperature drift of +10% or less and switching frequency of 30 Hz. Channels S01 and S02 are indicated by a yellow LED and a red LED respectively, and a green LED shows power on.

Connectivity and protection. Rotatable M12 connector, 100 mm cable, PA66+20% GF housing and PC lampshade. Protection degree IP67. The sensor includes short circuit, overload and polarity protection, and withstands an impact voltage of 1000 V AC 50/60 Hz for 60 s.

Power and environment. Supply voltage of 10 to 30 VDC, consumption current of 20 mA or less, load current of 150 mA or less and residual voltage of 2.5 VDC or less. Ambient temperature from -25 °C to 70 °C, humidity from 35 to 95% RH, insulation resistance of 50 MΩ or more (500 VDC) and vibration resistance of 1.5 mm complex amplitude between 10 and 50 Hz.

Typical uses. Presence or clamping monitoring of metal parts in automation systems and production lines. Dimensions 47 × 18 × 35.1 mm, for integration in confined spaces.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote