LT20 – Non-flush inductive clamp sensor, NO+NO output, IP67

Non-flush inductive clamp sensor, NO+NO output, IP67

General Industrial Sensors & Transmitters

  • 3..10%
  • 10...30 VDC
  • ≤ 20mA
  • ≤ 150mA
Manufacturer part number
LT20
Manufacturer
Lanbao
Hysteresis range
3..10%
Supply voltage
10...30 VDC

Inductive clamp sensor from the Lanbao Power Clamp series, with NO+NO PNP output and 2 mm rated distance, for detecting ferromagnetic targets in industrial environments.

Product overview

Overview. The Lanbao LT20SN02DPOA-E2 is an inductive proximity sensor from the Power Clamp series, designed to detect ferromagnetic metal targets in industrial environments.

Main characteristics. Rated distance of 2 mm for both S01 and S02, non-flush installation, switching frequency of 1000 Hz and hysteresis of 3 to 10%. Standard target Fe8*8*1t, repetitive error less than or equal to 3%.

Outputs and connectivity. NO+NO PNP output, with yellow LED indication for S01 and red LED for S02, plus a green power indicator LED. M12 connector, sensor head line length of 100 mm +5 mm on each channel.

Power and protection. Supply voltage of 10 to 30 VDC, consumption up to 20 mA, load current up to 150 mA and residual voltage up to 2.5 VDC. Protected against short circuit, overload and polarity reversal.

Environment. IP67 protection degree, ambient temperature from -25 °C to 70 °C, humidity from 35 to 95% RH. PA66+20%GF housing and PC lampshade. Vibration resistance of 1.5 mm complex amplitude between 10 and 50 Hz, two hours in each of the X, Y and Z directions.

Integration. Dimensions 47 × 18 × 28.5 mm. Suited to integration into control and monitoring assemblies, available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Supply voltage: 10...30 VDC
  • Ambient temperature: -25°C..70°C
  • Connection Type: M12 connector
  • Ensure distance: S01:1.6mm/S02:1.6mm
  • Environment Humidity: 35...95%RH
  • Housing Material: PA66+20%GF Lampshade :PC

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 10...30 VDC.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote