Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

PSE-TM10 – Infrared through-beam photoelectric sensor 10 m

Infrared through-beam photoelectric sensor 10 m

General Industrial Sensors & Transmitters

Manufacturer part number
PSE-TM10
Manufacturer
Lanbao

Lanbao PSE-TM10 through-beam photoelectric sensor for detecting opaque objects over a 10 m range, with selectable NPN or PNP NO/NC outputs.

Product overview

Overview. The Lanbao PSE-TM10 is an infrared (630 nm) through-beam photoelectric sensor made of a separate emitter and receiver. It detects any opaque object with a minimum diameter of 10 mm within its 10 m detection range.

Load current of 200 mA or less and voltage drop of 1 V or less.

Interfaces and connectivity. NPN or PNP NO/NC outputs, selected by model: PSE-TM10DR, PSE-TM10DNBR, PSE-TM10DPBR and their -E3 variants. Connection by 2 m PVC cable or by 3-pin M8 connector.

Power and environment. Supply voltage of 10 to 30 VDC, current consumption of 20 mA or less per emitter and receiver. Protected against short circuit, overload, reverse polarity and zener surge. IP67 protection degree, operating temperature from -25 to 55 °C, storage temperature from -25 to 70 °C. PC+ABS housing, PMMA filter, weight 50 g.

Typical uses. Presence detection, counting and passage control on automation lines, with direct connection to a PLC or discrete input module through the NPN or PNP outputs.

Compliance. Conforms to EN 60947-5-2:2012 and IEC 60947-5-2:2012, CE marked.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote