Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

PSE-TM30 – Through-beam laser photoelectric sensor 30 m

Through-beam laser photoelectric sensor 30 m

General Industrial Sensors & Transmitters

Manufacturer part number
PSE-TM30
Manufacturer
Lanbao

Lanbao PSE-TM30 through-beam laser photoelectric sensor, 30 m rated distance, NPN or PNP NO+NC outputs, for object presence and passage detection.

Product overview

Overview. The Lanbao PSE-TM30 laser photoelectric sensor is a through-beam sensor with a rated distance of 30 m. Its emitter and receiver are housed in a small square type housing.

Main characteristics. Red laser source at 650 nm, Class 1, with a 36 mm light spot at 30 m. Distance adjustment by knob. Response time below 0.5 ms on both on and off. Supply voltage 10 to 30 VDC, ripple below 10% Vp-p. Consumption below or equal to 20 mA for both the emitter and the receiver.

Outputs and connectivity. NPN or PNP outputs, NO+NC, load current up to 100 mA, voltage drop up to 1.5 V. Connection by 2 m PVC cable or M8 4-pin connector depending on the reference. Green (power) and yellow (output, overload or short circuit) indicators.

Power and environment. Protection against short circuit, overload, reverse polarity and by zener diode. IP67 protection rating. Operating temperature from −10 °C to 50 °C, storage temperature from −40 °C to 70 °C, humidity from 35% to 85% without icing or condensation.

Typical uses. Presence, passage or counting detection of objects on conveyors or in machines, in automated installations connected to a PLC through a discrete input.

Compliance. CE certified, in accordance with EN 60947-5-2:2012 and IEC 60947-5-2:2012 standards.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote