Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

PSEP-BC30 – Plastic square diffuse photoelectric sensor, IP67

Plastic square diffuse photoelectric sensor, IP67

General Industrial Sensors & Transmitters

Manufacturer part number
PSEP-BC30
Manufacturer
Lanbao

Diffuse reflection photoelectric sensor from the PSE series, in an IP67 plastic square housing, designed to detect objects in harsh environments.

Product overview

Overview. The Lanbao PSEP-BC30 is a diffuse reflection photoelectric sensor in a plastic square housing, from the PSE Little Square series. It detects objects at a rated distance of 30 cm.

Main characteristics. Red light source at 640 nm, spot diameter of 13 mm at 30 cm, response time T-on and T-off less than or equal to 1 ms, distance adjustment by large knob and NO/NC adjustment by drive-by-wire, hysteresis range of 3 to 20%. A green indicator shows power and stable signal, and flashes when the signal is unstable.

Outputs and connection. NPN NO/NC or PNP NO/NC output, load current up to 100 mA, voltage drop less than or equal to 1.5 V, consumption current less than or equal to 12 mA. Connection by 2 m PVC cable or M8 4-pin connector. Protection against short circuit, overload, reverse polarity and zener protection.

Power supply and environment. Supply voltage 10 to 30 VDC. Operating temperature -25 °C to 55 °C, no condensation; storage temperature -25 °C to 70 °C. Protection degree IP67. Housing in PC+ABS, filter in PMMA. Weight 50 g, with two screws and mounting bracket ZJP-8 supplied.

Typical uses. Presence or position detection of objects on industrial automation lines, in humid or dusty environments. Compliant with EN 60947-5-2:2012 and IEC 60947-5-2:2012 standards.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote