PU30 – Through-beam infrared fork photoelectric sensor 30 mm

Through-beam infrared fork photoelectric sensor 30 mm

General Industrial Sensors & Transmitters

  • 10… 30 VDC
  • ≤ 15mA
  • ≤ 200mA
  • … &hellip
Manufacturer part number
PU30
Manufacturer
Lanbao
Supply voltage
10… 30 VDC
Consumption Current
≤ 15mA

The Lanbao PU30 fork sensor is a small through-beam infrared photoelectric detector for detecting the presence of opaque objects within a fixed gap.

Product overview

Lanbao PU30. The PU30 is a through-beam fork photoelectric sensor from the PU30 series of Shanghai Lanbao Sensor Technology, designed to detect opaque objects passing between its two prongs.

Main characteristics. Adjustable 30 mm rated distance, detection of opaque objects larger than 2 mm, response time below 1 ms and modulated infrared light source. The sensor features an anti-interference algorithm that avoids cross-signal interference between neighbouring sensors.

Outputs and interfaces. NO/NC PNP output with yellow output indicator LED, load current up to 200 mA, residual voltage at most 2.5 V and consumption current at most 15 mA. 2 m PVC cable connection. Protection against surge, reverse polarity and short-circuit.

Power and environment. Supply voltage 10 to 30 VDC. Ambient temperature -15 °C to +55 °C, ambient humidity 35 to 95 %RH. Aluminium alloy housing, degree of protection IP60 with IP rating given as IP20 to IP44 in the data. Insulation resistance of at least 50 MΩ (500 VDC) and voltage withstand of 1000 V AC 50/60 Hz for 60 s. Vibration resistance 10 to 50 Hz (1.5 mm).

Dimensions and integration. Overall size 72 x 52 x 16 mm, suited to compact installations where a fork presence detector must fit into a restricted gap.

See all specifications

Highlights

  • Dimensions: 72 mm *52 mm *16mm
  • Response time: < 1ms
  • Ambient Humidity: 35-95%RH
  • Circuit protection: Surge, reverse polarity and short-circuit
  • Connection Type: 2m PVC cable
  • Degree of protection: IP60

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 10… 30 VDC.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote