PSM-TM-E2 – Cylindrical M18 through-beam infrared photoelectric barrier 20 m

Cylindrical M18 through-beam infrared photoelectric barrier 20 m

General Industrial Sensors & Transmitters

  • -25...55 º C
  • 10...30 VDC
  • ≤ 200mA
  • -25...70 º C
Manufacturer part number
TM-E2
Manufacturer
Lanbao
Operating Temperature
-25...55 º C
Supply voltage
10...30 VDC

Lanbao PSM-TM-E2 cylindrical M18 through-beam photoelectric sensor with a 20 m rated range, for detecting opaque objects larger than 15 mm in diameter.

Product overview

Overview. The Lanbao PSM-TM-E2 is a cylindrical M18 through-beam photoelectric sensor: the emitter and receiver face each other and detection occurs when the infrared beam is interrupted.

Main characteristics. The rated range is 20 m, with an 850 nm infrared light source and a standard target of an opaque object larger than 15 mm in diameter. Response time is 1 ms or less. Distance is adjusted with a single-turn potentiometer, and the direction angle is greater than 4°.

Outputs and connection. The sensor is available with NPN or PNP output, in NO/NC configuration selected by wiring the white wire. Connection is made through an M12 4-pin connector. The green LED indicates power and stability, and the yellow LED indicates output, short circuit or overload.

Power and environment. Supply voltage is 10 to 30 VDC, consumption is 20 mA or less for both emitter and receiver, and maximum load current is 200 mA with a voltage drop of 1 V or less. It is protected against short circuits, overloads and reverse polarity. Degree of protection is IP67, operating temperature range is -25 to 55 °C and storage range is -25 to 70 °C. The housing is nickel copper alloy and the filter is PMMA.

Typical uses. Presence or passage detection of opaque objects on an automation line, thanks to the 20 m range and PLC compatibility through NPN or PNP output.

Certification. CE marking.

See all specifications

Highlights

  • Supply voltage: 10...30 VDC
  • Annex: M18 nut (4PCS), instruction manual
  • Certification: CE
  • Circuit protection: Short-circuit, overload, reverse polarity protection
  • Connection: M12 4Pin connector
  • Detection Type: Through beam

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 10...30 VDC.
  • Thermal: rated operating range -25...55 º C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote