DN15-25 – Ultrasonic Water Meter with RS485 and M-Bus Direct Reading

Ultrasonic Water Meter with RS485 and M-Bus Direct Reading

Gas and Water Smart Meters

  • R1
  • G1 1/4B
Manufacturer part number
DN15-25
Manufacturer
Lanry
Coupling screw B (inch)
R1
Meter screw A (inch)
G1 1/4B

Direct reading ultrasonic water meter for measuring, storing and displaying water flow on tap-water pipe networks, with RS485 and Modbus communication.

Product overview

Overview. The Lanry DN15-25 is a direct reading ultrasonic water meter used for measuring, storing and displaying water flow. It is designed for tap-water pipe network systems.

Main characteristics. The meter has no moving parts, which limits wear and ensures long-term stable operation. Its starting flow rate is low, with a minimum flow rate one third of that of a traditional water meter. It detects water temperature and raises a low temperature alarm. It can be installed at any angle without affecting measurement accuracy. Ultrasonic signal quality detection and an IP 68 design allow long-term operation under water. Its shelf life is above 10 years.

Interfaces and connectivity. The meter supports optical, RS485 and wired and wireless M-Bus communication interfaces. It complies with the MODBUS RTU and EN 13757 communication protocols.

Power and environment. The meter is compiled to the drinkable water standard requirements. Its photosensitive button simplifies operation.

Typical uses. Thanks to its RS485 port and Modbus RTU support, the meter can be connected to a PLC or a supervision system for remote reading of consumption.

Integration. Connections are G1 1/4B meter thread and R1 coupling thread. Technical documentation and dimensions are available on request from Atlas Electronics.

See all specifications

Highlights

  • Coupling screw B (inch): R1
  • Meter screw A (inch): G1 1/4B
  • Previous: Ultrasonic Water Meter with M-BUS/ RS-485/ Modbus/ LoRaWAN

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote