Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

DN15-DN40 – Small pipe size ultrasonic water meter

Small pipe size ultrasonic water meter

Gas and Water Smart Meters

Manufacturer part number
DN15-DN40
Manufacturer
Lanry

Direct reading ultrasonic water meter for measuring, storing and displaying water flow in tap-water networks, from DN15 to DN40.

Product overview

Lanry DN15-DN40 ultrasonic water meter. The Lanry DN15-DN40 is a direct reading ultrasonic water meter used to measure, store and display water flow in tap-water pipe networks with nominal diameters from DN15 to DN40.

Measurement performance. The starting flow rate is low, with a minimum flow rate equal to one third of that of a traditional water meter. The meter has no moving parts, which limits wear and ensures long-term stable operation. It can be installed at any angle without influence on measurement accuracy. Ultrasonic signal quality detection is included.

Functions and compliance. Water temperature is detected, with a low temperature alarm. The meter complies with drinking water standard requirements.

Connectivity. Optical, RS485 and wired and wireless M-bus communication interfaces are supported. The meter complies with the MODBUS RTU and EN 13757 communication protocols.

The shelf life is above 10 years. The photosensitive button avoids any mechanical opening.

Integration. The coupling screw is R1/2, R3/4, R1, R1 1/4 and R1 1/2 inch, and the meter screw is G 3/4B, G 1B, G 1 1/4B, G 1 1/2B and G 2B inch. With an RS485 port and Modbus RTU support, the meter can be connected to a PLC or a supervision system.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote