DN150 – Partially filled pipe Doppler ultrasonic flow meter

Partially filled pipe Doppler ultrasonic flow meter

Ultrasonic Flow Meters

  • 0°C ~+60°C
  • 0°C to 60°C
  • 0mm to 10000mm (10m)
  • 20mm to 5000mm (5m)
Manufacturer part number
DN150
Manufacturer
Lanry
Operating Temperature
0°C ~+60°C
Temperature range
0°C to 60°C

Doppler ultrasonic flow meter for partially filled pipes DN150 and above, open channels and rivers, measuring water velocity, depth and conductivity.

Product overview

Overview. The Lanry DN150 is a Doppler ultrasonic flow meter for partially filled pipes DN150 and above. It measures the velocity, depth and conductivity of water flowing in rivers, streams, open channels and pipes. With the companion DOF6000 calculator, flow rate and total flow can also be calculated.

Main characteristics. Velocity is measured with the ultrasonic Doppler principle in quadrature sampling mode, with a range of 20 mm/s to 13.2 m/s depending on the version and an accuracy of ±1 % R, with bidirectional measurement. Depth is measured by two sensors: pressure, from 0 to 10,000 mm with an accuracy of ±2 mm, and ultrasonic, from 20 mm to 5,000 mm with an accuracy of ±1 mm. Electrical conductivity is measured from 0 to 200,000 µS/cm with an accuracy of ±1 % R. The calculator can determine the cross-sectional area of a partially filled pipe or a river from up to 20 coordinate points describing its shape.

Interfaces and connectivity. Pulse, 4-20 mA (flow and depth), RS485/Modbus RTU with up to 500 m of cable, SDI-12 with up to 50 m of cable, datalogger and GPRS outputs. The sensor includes 16 GB of data storage.

Power and environment. Calculator powered by 220 VAC and 12-24 VDC, sensor powered by 12 VDC. IP68 protection, operating temperature from 0 °C to +60 °C and storage temperature from -20 °C to +60 °C.

Typical uses. Measurement in wastewater, lightly dirty liquids, rainwater, river water, canals, streams and culverts, for partially filled pipes and open channels.

Integration. The RS485 output with Modbus RTU allows connection to a PLC or a supervision system.

See all specifications

Highlights

  • Case Material: Fiber Glass
  • Data storage: 16GB
  • Depth (Pressure) — Accuracy:: ± 2mm
  • Depth (Pressure) — Range:: 0mm to 10000mm (10m)
  • Depth (Pressure) — Resolution:: 1 mm
  • Depth (Ultrasonic) — Accuracy:: ± 1mm

Good to know before integrating

  • Thermal: rated operating range 0°C 〜+60°C water temperature — check it against the installation environment.
  • Thermal: rated operating range 0°C ~+60°C — check it against the installation environment.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Ultrasonic Flow Meters
Request a quote