TF1100-CH – Portable clamp-on transit-time ultrasonic flow meter for liquids

Portable clamp-on transit-time ultrasonic flow meter for liquids

Flow Sensors

  • -20℃ to +60℃
  • 0.5s
  • Std: 5m
  • OCT, RS232,Logged data
Manufacturer part number
DN20MM
Manufacturer
Lanry
Operating Temperature
-20℃ to +60℃
Response time
0.5s

Portable ultrasonic flow meter with clamp-on sensors for non-invasive measurement of liquid flow in fully filled pipes. Suited to maintenance, control and calibration work.

Product overview

Lanry TF1100-CH is a portable transit-time ultrasonic flow meter supplied with clamp-on transducers mounted on the external surface of the pipe. It measures the flow of liquids and liquefied gases in fully filled pipes without intrusion into the fluid.

Measurement. The measurement principle is ultrasonic transit-time difference correlation. The flow velocity range is 0.01 to 12 m/s, bi-directional, with an accuracy of ±1.0% of reading at rates above 0.3 m/s and a repeatability of 0.2% of reading. The resolution is 0.25 mm/s and the response time is 0.5 s.

Transducers and pipe sizes. Three pairs of transducers cover pipe diameter ranges of 20-50 mm (type S), 40-1000 mm (type M) and 1000-6000 mm (type L). The standard transducers in aluminum operate from -35 °C to 85 °C, with short excursions up to 120 °C, and the high-temperature transducers are made of PEEK. The liquid can be clean or somewhat dirty, with turbidity below 10000 ppm.

Display and data. The backlit 4-line by 16-character graphic LCD shows flow rate and velocity, with a user-selectable damping of 0 to 99 s. Totalizers are available in gallons, ft³, barrels, lbs, liters, m³ and kg, with units configurable in English or metric. A data logger function is built in, with keypad and system lockout.

Communication and power. The handheld unit measures 212 × 100 × 36 mm and weighs 0.5 kg, with OCT, RS232 and logged data communication. The AC supply is 85-265 V, and the rechargeable internal batteries provide up to 14 h of operation. The ABS housing is rated IP65 according to EN60529, for an operating range of -20 °C to +60 °C.

Typical uses. It suits on-site service and maintenance, control or temporary replacement of permanently installed meters, and data comparison or flow rate calibration checks.

See all specifications

Highlights

  • Response time: 0.5s
  • Cable Length: Std: 5m
  • Communication: OCT, RS232,Logged data
  • Damping of displayed value: 0-99s(selectable by user)
  • Degree of protection: IP65 according to EN60529
  • Display: 4 line×16 English letters LCD graphic display, backlit

Good to know before integrating

  • Thermal: rated operating range -20℃ to +60℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Flow Sensors
Request a quote