Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

DN32 – Direct-reading ultrasonic inline water meter

Direct-reading ultrasonic inline water meter

Gas and Water Smart Meters

Manufacturer part number
DN32
Manufacturer
Lanry

Direct-reading ultrasonic inline water meter for measuring, storing and displaying water flow on tap-water distribution networks.

Product overview

Overview. The Lanry DN32 ultrasonic inline water meter is a direct-reading meter used to measure, store and display water flow in tap-water pipe network systems. It covers a nominal diameter range from DN15 to DN40.

Main characteristics. The starting flow rate is low, with a minimum flow rate equal to one third of that of a traditional water meter. The meter has no moving parts, which limits wear and ensures long-term stable operation. It detects water temperature and raises a low-temperature alarm. Ultrasonic signal quality detection is built in, and the meter can be installed at any angle without affecting measurement accuracy. Its shelf life is above 10 years.

Interfaces and connectivity. The meter supports optical, RS485 and wired and wireless M-bus communication interfaces. It complies with the MODBUS RTU and EN 13757 communication protocols.

Power and environment. The housing is IP 68 rated for long-term underwater operation. A photosensitive button is provided for display operation.

Typical uses. The RS485 link with MODBUS RTU allows connection to PLCs to transmit consumption readings. The M-bus outputs suit remote reading of water meters.

Compliance. The meter complies with the drinkable water standard requirements.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote