TF1100-EC – Clamp-on ultrasonic flow meter, 4-20 mA and RS485 output

Clamp-on ultrasonic flow meter, 4-20 mA and RS485 output

Ultrasonic Sensors

  • -20℃ to +60℃
  • 0.5s
  • Std:10m
  • Wall-mounted
Manufacturer part number
DN50-700
Manufacturer
Lanry
Operating Temperature
-20℃ to +60℃
Response time
0.5s

Ultrasonic flow meter mounted on the outside of the pipe, with no cutting or process interruption, for measuring liquid flow in fully filled pipes. Suited to maintenance, control and temporary replacement of meters.

Product overview

Lanry TF1100-EC, clamp-on transit-time ultrasonic flow meter (wall-mounted) for measuring the flow of liquids and liquefied gases in fully filled pipes. The transducers are mounted on the external surface of the pipe, with no cutting and no process interruption.

Measurement principle and range. The measurement is based on the transit-time method and the ultrasonic transit-time difference correlation principle. The flow velocity range is 0.01 to 12 m/s, bi-directional. Pipe diameters covered are 20-50 mm for type S, 40-1000 mm for type M and 1000-6000 mm for type L. Accuracy is ±1.0% of reading at rates above 0.3 m/s and ±0.003 m/s of reading below 0.3 m/s, with repeatability of 0.2% of reading.

Connectivity and outputs. The transmitter provides an analog 4-20 mA output (accuracy 0.1%), RS232 and RS485 ports with Modbus protocol, a relay and a data logger function. Totalized quantities are available in gallons, ft³, barrels, lbs, liters, m³ and kg, and thermal energy measurement in GJ or kWh is available as an option with a Pt1000 temperature sensor.

Power, environment and construction. The transmitter is powered by 85-265 V AC or 24 V DC / 500 mA. It has an IP66 degree of protection according to EN60529 and an operating temperature range of -20 °C to +60 °C. Admitted liquids are clean or somewhat dirty, with turbidity below 10000 ppm, and the liquid temperature can reach 85 °C continuously and 120 °C for short periods. The housing is fiberglass and the transducers are aluminum, or PEEK for high temperatures. Weight is 2.4 kg.

Typical uses. Service and replacement of defective meters, pump performance measurement, monitoring of regulating valves, flow measurement in water, waste water, cooling water or sea water.

Integration. Thanks to its RS485 Modbus port, the device can be connected to a PLC or a supervision system.

See all specifications

Highlights

  • Response time: 0.5s
  • Cable Length: Std:10m
  • Communication: 4~20mA(accuracy 0.1%),OCT, Relay, RS232, RS485 (Modbus),data logger
  • Damping of displayed value: 0-99s(selectable by user)
  • Degree of protection: IP66 according to EN60529
  • Display: 4 line×16 English letters LCD graphic display, backlit

Good to know before integrating

  • Thermal: rated operating range -20℃ to +60℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Ultrasonic Sensors
Request a quote